We had an issue with our rear wiper not working after a service, which was quite odd as they did not mention it being a problem. I checked the fuses and they were fine. For some reason I decided to disconnect the battery to try and reset it. Did the trick, but make sure you have the radio code...
I had a problem like this and it was the connecting block between the light loom and the light unit. The pins were not touching, bent them over slightly to make contact and added some silicone grease. Fixed!
Cheers is it this one?
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_162753_langId_-1_categoryId_165469
Can't be arsed to take it all to pieces again, to find out I don't have the right tool :laugh:
Can anyone post me a link for the tool they used to remove the plugs, as I am having difficulty trying to get a tool that will fit? The plugs are quite deep in the head and the diameter of my sockets is too wide (for the bore of the holes by mm’s) and I can’t find anything in local motor...
We had this problem and had the seal replace on the boot hatch (like a clack clack noise over bumpy roads). If you have the rear seats on runners they can rattle.
Cant be 100% sure, but the only changes seem to be lights, grills and indicators. The new shape bumper is the same as the 160SR bumper. Have a look on google images.
We had some vibration issues with our 160. Rear seal on boot and exhaust manifold, which were fixed under warranty. Nearly a rattle free car :grinning:
I think ours has a problem like this and it is not good for the clutch. Its somthing it has aquired over time. Is there a way of resetting the ecu / throttle body? I know on some cars you can reset some learning perameters of the ecu by removing the earth, can this be done on the micra?
I cant tell you exactly which size but I purchase a set of various sizes from B&Q and there was one in there that was correct. They are not expensive. When I changed mine it was a caliper off affair, which is a bit of a pain. The discs so nearly come off with pads out.