Recent content by CMF_sva86

Hi mate! I think you have a lose wire connection in the engine bay. Check the connection of the ETC sensor socket and pins for corrosion and etc.I think that the developing of the problem during acceleration is in relation with the engine moving back and forward during the acceleration.

Thanks!

Hi! Just want to share what i have made for my Beauty :) . Little info before the story! I wanted to put rev counter on my 97 1.0 GX micra.So i bought a dash with the Rev.But here the story starts. My micra is having Air Bag,and have a Check Engine Light,but non of the dashboard with Rev had...

May be it is your TB. Try to unplug it or re solder.

Sorry for the Spam,but what is the name of this software?

Hi! Wondering if someone know what is the item on the Pic. I think that it is a capacitor and wanted to know what is his capacity,but cant seem to find it anywhere in the diagrams. http://imageshack.com/a/img577/8571/hi85.jpg

Thanks for the quick reply Frank,i was crossing fingers that you see the post :) . Will the loose bottom chain advance the cams too much? Will there be a noticeable difference with 1.5mm skim or just the cams will take the major effect. Because the work with dismounting and working on the head...

Wanted to ask what do you think will come up. I have an idea to put 1.3 cams on my 1.0 and skim the head 1.5-2mm. And are the 1.0 and 1.3 heads differ only in the cams or are they different in other things(flow,combustion camber of the head and etc.) I know that there are proven gains only with...

Because no one responded. I had to disassemble my own and measure them. And in case someone need it in the future they are 60mm long!

I think it is only possible from the VIN of the car.

Today i went to buy a set of guide pins for the k11,but in the shop they had 2 different lengths.So if someone have a old one on hand to measure the length for me.The car is 1.0 96reg. Thanks in advance!

The manual says 25-30nm,then 60-65 degrees clockwise with angle wrench. It is mentioned that it is very important not-to tighten them with toque,but to degrees.

Hi to all! The time to change the front struts came! So the question is what is the best price/quality strut for the K11.What have you bought,and will you buy it again? Brand's,model's and all the stuff. For now I'm heading for KONI STR.T,have anyone had any experience with them,and what are...

Today i decided to buy a set of rear speakers for the little micra,and have a question about the wiring. Because mine is GX and have no rear speakers,and wonder if someone knows is there a wiring harness already in the car? I mean is the cable for the original speakers factory putted, or only...

How can you tell that it does not fire? If there is a prob. with the head-gasket and there is no compression in the cylinder you will feel it like that.I suggest you measure the compression first and if it is OK,then start looking for other issues.If you have a spark,and fuel there should not be...