here i have for sale a nissan micra turbo running 140bhp and 145lb/ft of torque the current spec is
1.3 cg13 engine and box
with race prepd head
t2 full turbo kit
256cc injectors in a custom rail with fuel pressure reg
dumpvalve
boost pipes and intercooler
1.5mm spacer plate 8.2 compression...
Mild Port and polish 3piece grind on valves and 2piece grind on head standard headgasket with 1.5mm spacer plate had it at 170bhp but was difficult to drive very tickover
The bonnet was done by me its sheet metal cut to shape tack welded on and filled pretty easy if your a dab hand with a...
turbod my micra a while back and just not had the time to post it up you can go to my forum to see the full spec
theres been alot of happiness and sadness while building this but the end result is really pleasing...
i have for sale the following two items at the minute
-30mm wide arch kit brand new never fitted will take £80 i paid alot more
-front and rear perspex windows rear ones are bounded and the front one can be made to fit window rail or bounded in place they are the ones with slide (orginally of...
mine isnt standard compression im running a 1.5mm spacer plate does anyone have a basic map for the apexi safc2 just to get my car running on the apexi so i can get it to be tyned at the dyno thanks james
right just turbod car (pics to follow once i upload).i need to set my fuel pressure reg and dizzy to correct settings so i can get my car to the rolling road to get the apexi safc2 wired up .at the minute its over fueling on tick over so cutting out and only 3psi of boost so its undrivible...