Recent content by CMF_machi san

Although wouldn't it over rev instead of under rev with 720*?

Yes I used the cas wire for rpm signal I believe. Makes sense though. Thanks frank The yellow/red wire joins into the blue wire after the igniter

I don't. I want it to limit at 8k but even on highest setting (should be about 10k) it stops at 5 and doesn't pop or bang. Bee r is a rev limiter that also has launch control function

Mine doesn't have a limiter. Certainly not at 5k rpm. Apart from the bee r There is atleast 2 peeps on here with working bee r but can't find any info with search function :( I used red/yellow wire and white wire from the dizzy

It rev limits at 5k max and sounds like a regular limiter :( works fine on my skyline enginef s13 :s

Hi chaps Iam new here :D I have a bee r limiter and I need help with the green wire and the yellow wire. So far I have figured that green needs to splice into rpm signal. So either pin 2 or 22 and yellow needs to go to pin 3 igniter signal. Is this correct? And I cut the grey loop wire for 4...