Recent content by CMF_discopotato03

  1. C

    143.7kW

    Hi Cisco , I am curious to know what the driving experience is like . From your graph it looks top endy , have you really got to rev it to get some boost or is it reasonably good down low ? I should explain that I'm more used to larger engines and the boost starting lower down the rev range ...
  2. C

    engine oil issue

    Yom what do you meany by grade 5 ? I realise that some oils are "more" synthetic than others due to a rather large legal battle in the US a while back and a contradiction in defining synthetic . I think you'll find high detergent oils will move "sludge" though from what I've seen in poorly...
  3. C

    A few updated pics

    Compressor .
  4. C

    A few updated pics

    Some details of Garretts GT2854R . Unit no 471171-0009 , cartridge or CHRA no 446179-0047 . Compressor and turbine maps from turbobygarrett .
  5. C

    A few updated pics

    Hi Cisco , would it be possible to have the numbers off the Turbos bearing housing ID tag please . Turbos are my interest and I can identify its cartridge and wheels from its number . Being a GT28BB its cartridge number should be along the lines of 446179-50xx . I mentioned in the forced forum...
  6. C

    Garrett Turbos .

    Hi all , I did a bit of sniffing around at turbobygarrett and from the maps there's a few I'd narrow it down to . If it was to be a plain bearing job I would look at some of the smaller compressor trim GT20's . For something more modern the GT2854R could be ok though any extra engine capacity...
  7. C

    CG13DE and CGA? 14DE , 1348cc ? questions .

    Thanks all , after some hours I did find specs of the CGA3DE which said 72 x 82.8 (B/S) so a little bore and stroke ? Interesting about better head maybe and cams because it all helps small engines make torque - and spool good turbos . Distributorless ignition sounds nice . With engine...
  8. C

    CG13DE and CGA? 14DE , 1348cc ? questions .

    Hi all , have tried searching and can't find any info on the 1348cc CGA motor . Is it available in Aus and what are the differences ? I did do some searching on the GA15 and 16DE's and it seems they use a taller block than 1.3 or 1.4 ? L . I did see a picture of a GA15 in an American Sentra...
  9. C

    Newby to Micras .

    Hi all , after a bit of a surf I've come to the conclusion that Nissans Micra will probably be my next car to replace the G11 Charade I have . Good ole Nissans done it again , Japanese mechano set and so much in the way of parts interchangeability from what the masses consider to be ho hum cars...
Back
Top