Recent content by CMF_brito.jc

  1. C

    Idle speed to high.

    Hi, yes is 1994 1.0 and have a 4 wires on the g/box and i have no rear shift light to, i've check the lamp and it's ok check the suport and don't have voltage there. i think the swicth is faulty but i don't know if i can remove it. Thks Carlos
  2. C

    Idle speed to high.

    hi, the cold start idle it's ok, thks to frank. i'm going to check the neutral swicth and the speed sensor. can the neutal swicth be removed? the speed sensor is on the distributor? thanks for the help Carlos
  3. C

    Idle speed to high.

    thanks for the pic Frank i'm going to try it.
  4. C

    Idle speed to high.

    hi, Frank can you show me the screw or the me more specific were it is? the neutral swicth is on the gearbox correct? Thks Carlos
  5. C

    Idle speed to high.

    hi, I've just already done the resoldering job of the trothle body because the idle was up and down and the car lose power, after the resoldering the idle stays high at cold and when the car is running and only goes down when stop. the waxstat have any regulation? Thks Carlos
  6. C

    Idle speed to high.

    Hi Alex, this is 1.0 manual but the idle speed is the same and at warm temp i think that is ok, i can't see because i don't have a rpm meter. theres another problem, is when driving and coming to stop the idle stays hi until i totaly stop the car. Thks Carlos
  7. C

    Idle speed to high.

    hi, yes the tube come from gearbox breather. i buy this car a few days ago and i'm trying to repair it, this tube is supose to be this way? what is the waxstat problem? sorry for my english thks Carlos Brito
  8. C

    Idle speed to high.

    hi, i'm from portugal and i have a nissan micra k11 1.0 that, on the first star the idle speed goes to high, and i can't find the cause. i have one tube disconeted, " i think" but i can't find were to connect it. you can see the tube on the image. can someone help me please. Thanks
Back
Top