CMF_TurtleMan
» CMF MemberI've never turbo a car before and an just looking at what I'll need to run a low boost setup. So I can price it up and figure out how much work there is. Please correct anything I'm wrong about.
First is a turbo duh, I was thinking ca18/rb26 as they are the t3?
Next the manifold. Should I j pipe or I know a good fabricator (solid engineering) and just make a whole New manifold.
Turbo lines. I know the oil drain goes into the sump, so do I get the feed from the rocker cover? And I'm not sure about the water lines.
Fuel. If I only run 5/6psi can I get away with stock injectors/ROM and just run a bigger fuel pump and fuel presser reg without detonation.
And last would be intercooler and piping and that looks easy.
First is a turbo duh, I was thinking ca18/rb26 as they are the t3?
Next the manifold. Should I j pipe or I know a good fabricator (solid engineering) and just make a whole New manifold.
Turbo lines. I know the oil drain goes into the sump, so do I get the feed from the rocker cover? And I'm not sure about the water lines.
Fuel. If I only run 5/6psi can I get away with stock injectors/ROM and just run a bigger fuel pump and fuel presser reg without detonation.
And last would be intercooler and piping and that looks easy.