FSE ideal pressure

[CMF_1300supers]

Hi just install my new FSE

Whats the ideal bar to adjust it?

Factory is 3bar at acelaration i think!!

 

[CMF_turbo march-rolling shell]

i'll assume your talking about a fuel reg. stock pressure is 37.5psi @ idle

 

[CMF_1300supers]

yes its a fuel reg...

so its 50psi at idle is it too much turbo?

it seams u guys in australia dont use this kind of regulators much....

why?

 

[CMF_SSUK]

Stock pressure is 3bar at WOT, so it should be set with the vacuum hose disconnected. I would advise noting what it drops to in idle and checking this say once a year, as the FSE valves are notorious for not holding fuel pressure properly........one of the reasons I use a SARD reg on my car, the FSE was binned years ago for causing running & mapping problems.

Sorry for the above info, i hope you have one of the few good ones

 

[CMF_turbo march-rolling shell]

yeh. fse = nasty.. i use a sard aswell.. but even those are being copied by the chinese.. so beware of imatations , you should really set it via a dyno or wideband to get your mixtures right.

 

[CMF_1300supers]

well does anyone has diff opinions???

Cause i get scared know! Looks like Fse will ruin my micra!!!

 

[CMF_fred]

going more than 50psi will make the injector squirt rather than mist/atomize fuel making the engine less efficent and waste fuel....IMHO