Recent content by willmcgphoto

What do you mean by clean the solder off down to the silver as in remove the solder on the top and resolder it? How do I get in to the blower? I can't find how to do it anywhere! I've got a multimeter, just need to know what to do to test the card.

Ok, so my blower isn't working, the heating is, since the vents defo heat up, they just don't blow air. I've taken out the resistor card, but don't know how to test it? i've checked the continuity between the pins and pins 1-2 link and so do pins 3-4. Someone else said his was a loose...

Just go to Nissan/dealer and ask for the plastic cover for a 2014 DCI xtrail key, they will tell you it won't fit but its the exact same cover. It cost about a fiver. I got one last year, tried to get it for my micra and they told me they don't do them. But it's the same key as my mums xtrail...

I'm having the exact same issue, but the pictures aren't showing?

I've heard some k12's have them, and i'd love it for speed purposes (the cops are everywhere in Glasgow just now, you literally can't drive a minute without seeing one) Glasgow currently is the highest grossing city in the uk in fines for bus lanes etc and the cops pull you for the tiniest speed...

04 plate 1.5 turbo diesel mate

Dunno man ? what clio shifter kit should i look for ?

I have no idea what those are ? i searched online there and couldn't find anything, is there meant to be a space in between all that ? I'll assume the "5" in there denotes 5 stud, which mean they won't fit. You need 4 stud wheels with a 4x100 offset. So just look for alloys with 4x100 on...

Gumtree is a good shout as well, i got 4 wolf race JDM's for £60 with 4 low profile tyres fitted, 5-6mm on each. needed painted and filled, and still aren't 100 % perfect when looking up close, can't notice it standing though. I'm a perfectionist when paining but was storing stuff for it at my...

wanting a short shifter, i love them !! Anybody know where i can get one for an 04' k12 ?

I've seen some posts about it, but no certain answer, some saying that some think its 6inches, some think. Anybody got a definite answer before i take my door cards off ? Looking at these fli audio speakers, got multiple holes so the mounting should fit as long as the size is ok. The...

My hand wouldn't get down to the grommet without removing all that, the engine bay is so packed ! Once i got it through there it was ok.

Yeah mate, got the wiring through at least ! What side did you put yours through when facing the engine from the outside ? I had to go on the right and had to remove the glovebox, battery, cold air intake and the airbox. The sun was splitting the trees when I went out and ended up pissing...

Heya, need to fit my subwoofer today and having trouble finding a grommet to put the power cable through from the battery to the boot. Obviously the engine bay is packed, where is the best place to pass the cable through the firewall ?

I've wanted to do this for ages, but I was told it wasn't possible and that the transparent parts of the dash that let the light through are tinted orange. If it's possible then I'd love to !