would corsa mk1 alloys fit micra k11

superls

K10 Tuner
the pcd is the smae but i dont know about the centre bore, but it wont ba a mile off so is not the end of the world if its slightly bigger/smaller
 

superls

K10 Tuner
i take it 56.6 is the centre bore? if so then no they wont direct fit, as the centre bore of the micra id 59.1 i think, so will need to be machined out ideally.
 
Or you could fit spacers to clear the centre.

The problem with most Corsa alloys is the positive offset. Especially earlier Corsas.

You may find the wheels fit too far under the arches and it could upset the handling.

If you have still to buy the wheels couldn't you just trial fit them?
 

adamsricky

Club Member (Trial)
if the alloys have spiggots in which they should, just remove them with a hammer and punch and use the nuts to centre the wheels i have done this and have wobbling upto 100mph
 
OP
OP
P

pritz

Site Supporter
hello people thanks for all the help i think im just going to let these wheels go id prefer some that go on without any hassle but thanks again.
 
Top