Tyres / wheels

goldstar0011

Ex. Club Member
I know it's been asked tons of times but have to ask again!

What wheels can be used on a micra?
Am I right in saying :
Renault
Seat
Toyota (corolla)
Vauxhall
VW

I say these as Micra is 4x100 (I think) and the MaxPower Haynes Modifying manual states these makes as having 4x100 PCD. I know someone with Ford wheels on a Micra which is PCD 4x108.

Another question, offset, what is the micra's and what can b used without any modifying.
 
the center bore is usually to small on wheels made for most other cars even though the PCD is the same, u can grind them out urself or get them done properly on a lathe or something

offset is something u cant change unless its a split rim
 
Yes, the center bore is to small on most cars. The center bore is 59.1. The offset can be anywhere from 38mm to 45mm. And the rims can't be wider than 6.5. I have a couple of VERY helpful websites i'll post later today! Hope this helps!
 
Yes if the car is modded you could fit wider wheels! Anyways here are those web sites.

http://www.retro-rides.com/wheels.asp
For wheel pcd's!

http://toy4two.home.mindspring.com/offset.html
For calculating wheel offsets!

http://www.miata.net/garage/tirecalc.html
For figuring out what bigger and smaller wheels will do to your speedometer!

http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm
This site shows different cars wheel pcd's, width, size and center bore!

Hope this helps!
 
Back
Top