Turbo oil feed

Paul Smith

Site Supporter
Hello,

Just asking a general question, Those people that have turbo'd there micra's where abouts have you fed your oil feed from.

Basically I am after where I could feed the oil from the engine to the turbo?

I know where I used to have one but wondering if there are different choices of places to use.

Thanks
 

frank

Club Member
i would use the gallery plug on the front of the head personally paul, but i think most people "tee" off the oil pressure sender :)
 
OP
OP
Paul Smith

Paul Smith

Site Supporter
Which one is the gallery plug? any pics? I used the oil pressure one previously but it is not the most accessable place and tends to leak.
 

micras69

Deactivated Account
paul,
i found if you are buying/bought the ready made lines, there quight long. i ran the line form the gallery plug and found there is to much exces line and it bows quight a lot if you get my drift. so i ran it from the oil pressure sender.

but if you are makeing your own lines i would run it from the head as frank said (Y)
 
Top