Topfeed rail with 317cc injectors

[Azzydot]

Am using top feed rail from coil pack
and 317 cc injectors fit in tight am happy no cut or welding need, for this you will need spacers for the 2 bolts holding rails down. And 4 plastic tubing to go in the inlet manifold and just sits in o rings and into the injectors. so it's tight fit.
It's cheaper and less mods needed
Meaning doing this you will lose your idle valve coz it catches on the rails

Sent from my iPhone using Tapatalk

 

[Azzydot]

if I lose my idle valve where else can I put it? And wat will happen without one ?


Sent from my iPhone using Tapatalk

 

[Enuo]

http://lmgtfy.com/?q=idle+control+valve

 

[Azzydot]

I have looked on google


Sent from my iPhone using Tapatalk

 

[Enuo]

So you know what it does?

 

[Azzydot]

So you know what it does?

no I mean I wana take it off and move it esle where my Topfeed rails sits 5 mm hitting it


Sent from my iPhone using Tapatalk

 

[Enuo]

Yeah you asked what happens if you take it off... if you know what it does, well it won't do that lol. As to moving it I don't see why not but you'd have to do a bit of fannying around to connect it.

 

[Azzydot]

Yeah you asked what happens if you take it off... if you know what it does, well it won't do that lol. As to moving it I don't see why not but you'd have to do a bit of fannying around to connect it.

Will it cause problems if I use a tube connecting to the valve esle where ? Or work same way


Sent from my iPhone using Tapatalk

 

[Enuo]

Will it cause problems if I use a tube connecting to the valve esle where ? Or work same way


Sent from my iPhone using Tapatalk

Should work the same way.

 

[Azzydot]

Right I'll have a go at it


Sent from my iPhone using Tapatalk