Home
Forums
New posts
Search forums
Model-by-Model
K10
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
K11
K11 General Discussion
K11 Micra Blogs
K11 Tuning & Mechanical
K11 Forced Induction tuning forum
K11 Bodywork & Interior
K11s in Motorsport
March Cabriolet (FHK11)
K12
K12 General Discussion
K12 Micra Blogs
K12 Tuning & Mechanical
K12 Bodywork & Interior
K13
K13 General Discussion
K13 Micra Blogs
K13 Tuning & Mechanical
K13 Bodywork & Interior
K14
K14 General Discussion
Stickers
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
K10
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
K11
K11 General Discussion
K11 Micra Blogs
K11 Tuning & Mechanical
K11 Forced Induction tuning forum
K11 Bodywork & Interior
K11s in Motorsport
March Cabriolet (FHK11)
K12
K12 General Discussion
K12 Micra Blogs
K12 Tuning & Mechanical
K12 Bodywork & Interior
K13
K13 General Discussion
K13 Micra Blogs
K13 Tuning & Mechanical
K13 Bodywork & Interior
K14
K14 General Discussion
Menu
Log in
Register
Install the app
Install
Home
K12 Tuning & Mechanical
Suspension system.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Sparky2018" data-source="post: 782633" data-attributes="member: 31521"><p>Okay so I'm half way to getting it right I think the bar needs to span across from each side of tyre.(laser will lay on the two ends) </p><p>Can't find the laser level it must be stored someplace tho.</p><p>Has taken a while to get it to bolt up. As I'm re using old metal chairs. Including the bolts that are M7 hex. they are different size nuts. So I had to re make a few to get the shape I would like.</p><p>It just needs cutting down at the rear where it fits onto the tyre.</p><p>Am also not sure I like how it will not center but have got lots of these metal bars and legs to practice and get it in the center bore or near enough to the center of wheel on both horizontal and vertical axis.</p><p>Its not bad for the first test run anyhow.</p><p>So far its cost nothing and apart from the laser level I intend to keep cost down to zero..</p><p></p><p>Thinking I need to add stand offs that are soft and adjustable to achieve a level surface when placed onto the front of wheel.</p><p>Sorry that its layed down I can't hold the wheel and take photo till after I have cut the excess material off the hanger.</p><p></p><p>If you have made one of these before or can see anything I'm missing so far please feel free to comment.</p><p>[ATTACH=full]67648[/ATTACH]</p></blockquote><p></p>
[QUOTE="Sparky2018, post: 782633, member: 31521"] Okay so I'm half way to getting it right I think the bar needs to span across from each side of tyre.(laser will lay on the two ends) Can't find the laser level it must be stored someplace tho. Has taken a while to get it to bolt up. As I'm re using old metal chairs. Including the bolts that are M7 hex. they are different size nuts. So I had to re make a few to get the shape I would like. It just needs cutting down at the rear where it fits onto the tyre. Am also not sure I like how it will not center but have got lots of these metal bars and legs to practice and get it in the center bore or near enough to the center of wheel on both horizontal and vertical axis. Its not bad for the first test run anyhow. So far its cost nothing and apart from the laser level I intend to keep cost down to zero.. Thinking I need to add stand offs that are soft and adjustable to achieve a level surface when placed onto the front of wheel. Sorry that its layed down I can't hold the wheel and take photo till after I have cut the excess material off the hanger. If you have made one of these before or can see anything I'm missing so far please feel free to comment. [ATTACH=full]67648[/ATTACH] [/QUOTE]
Verification
Post reply
Home
K12 Tuning & Mechanical
Suspension system.
Top