stereo help!!

[sammyboi]

I was reading through all the other posts about putting an upgraded stereo into a k10 and i know what i need. Was looking on ebay and found an ISO cable but not sure if it would work.

Would this one fit and work?? Because it has two connectors that i need to go to the sony headunit but has an extra one that goes to the car. Where would this one go?? im thinking a link to an amp/speakers,etc??

http://cgi.ebay.co.uk/AUTOLEADS-NIS...ryZ14932QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

If anyone can help me out here i would appreciate it very much :grinning:

 

[Retepetsir]

Yep that's what you need.

Are you talking about the black wire in the photo on that auction?

That is an earth cable for the headunit. Basically you need to sand down a section of chassis metal to reveal a clean metal surface, then bolt this connector to the car. You can usually unscrew a dash securing nut/bolt/screw and use this to hold the ring connector down.

Is that the kind of info you were after?

 

[sammyboi]

yes you have answered alot there!! thankyou!!

im on about the other white plug though....this one:

i couldnt find where it can be plugged into.

 

[Fordy]

green circled bit is for the rear speakers,

 

[sammyboi]

kool kool...cheers fordy!!