• This is an archive of the old Blogs system from the previous software. If you would like your blog entries moving/merging into the relevant forum/thread, please PM James. These blogs are READ ONLY. Replies CANNOT be made.

Stani's Micra Turbo Blog

Stani1029

Club Member
heres when i first bought the car back in january 2009, cost me £550 and travelled to birmingham to pick it.

2973667202a9828101302o.jpg

2973667202a9828101348o.jpg

2973667202a9828101385o.jpg


the next day i made a start on the bodywork as it was booked in for a half re-spray, a pic of the new and old micra

2973667202a9858100580o.jpg


once the super-s bumpers and spoiler were fitted the car went for its spray and 2 weeks later i got it back and on that day i fitted my spax coilovers and new alloys so here it is

2973667202a9894161591o.jpg

2973667202a9894161687o.jpg

2973667202a9894161772o.jpg


from there on i was doing little things like, wind deflectors, window tints, bonnet lifters and raisers

2973667202a9955379488o.jpg


and then big things like turbo it

2973667202a10014858020o.jpg
 
then the three months that engine lasted i i decided to change the wheels and go for grey/black sleeper look

2973667202a10365541082o.jpg

2973667202a10365570886o.jpg

2973667202a10365674705o.jpg

2973667202a10365674801o.jpg
 
banzai magazine

2973667202a12186787727o.jpg

2973667202a12186787764o.jpg


so with that engine in the bin, i soon had another rebuilt with what i called it "the experiment engine", it consisted of a few internal changes, this soon melted a piston (2 days). so off the road the car went as i thought it needed a facelift and obviously another engine. work began within a week where i had the bumper cut out to let more air into the intercooler, a new bonnet, some flush bonnet pins, and another "experiment engine" this time with the cga inlet/fuel rail setup.
 
2973667202a12186787427o.jpg

2973667202a12186787460o.jpg

2973667202a10959855581o.jpg

2973667202a12186787497o.jpg


the car was then up and running and put back into the body shop for a part re-spray again and it come home like this!
 
2973667202a11544733139o.jpg


then fitted the bonnet reg plate and sprayed the inside of the headlights

2973667202a11205684238o.jpg


the latest engine failed within a week due to lack of it being setup so it was time to get serious....i eventually got my own lock-up and work started once more. engine out, stripped down had a serious thought of what to do with it (still not forged) and i got a local place called engine resource to build it for me.

this time i decided to fit a hybrid t3 to it this time, got one for free and i bought a rebuild kit for it and rebuilt it, also had the gearbox reconditioned while it was out. so with all the parts back they were soon fitted. decided to go all out so took everypart of the interior out, fitted some cobra bucket seats and sparco harnesses, a better look steering wheel, plastic windows/sunroof, toyo r888's, and little engine bay mods.
 
2973667202a11840371676o.jpg

2973667202a11840371783o.jpg


i had it on the road and after 1 day disaster struck, i ran a drunk guy over who walked out infront of my car!

only windscreen and bonnet damage occured so i soon had the windscreen fixed and got 800 miles done before the mot and tax run out at the end of december 2009. the car is now back to the lock-up where ive fitted its new bonnet and started to take off the standard inlet to swap for the cga once more. ive now bought an omex 600 ecu and the plan is to get the boot and bonnet re-sprayed and then down to paisley to have the ecu fitted and mapped.

keep your eyes on this blog as i honestly think i can achieve 90bhp at the wheels :laugh:
 
PARTS IN EXCESS OF £7000

1275cc engine (rebuilt 800 miles ago), garrett t3 hybrid turbo with 360degree thrust bearing, braided oil feed/return, 2.5 custom stainless exhaust, 2" i/c piping with blue silicone bends/joints, large front mount intercooler with fan, re-useable fuel filter, walbro fuel pump, braided fuel lines, oil filter relocation kit, toyo sports oil catch tank, sfs blue silicone radiator hoses, coilpack micra inlet manifold/throttle body/fuel rail with sr20 injectors(needing bigger), nissan pulsar calipers with vented/grooved discs & ebc yellowstuff pads, super-s bumpers/spoiler, front bumper cut out for intercooler, full respray with black roof/bonnet, plastic windows/sunroof, fully stripped interior, cobra bucket seats with sparco harnesses, steering wheel/boss kit, 14" tsw freeze alloys in black, toyo r888 on the front and cooper xeon xtc's on the back, spax fully adjustable coilovers with nismo top mount bushes and steel top mount bearings, adjustable panhard rod, lower front strut brace, rear strut brace, standard gearbox/driveshafts, 3.4kg flywheel, helix competition clutch, bonnet pins, bonnet raisers, bonnet lifters, battery in boot, boost gauge, white dials, fire extinguisher, blitz radiator cap, nismo oil cap....TO FOLLOW-omex 600 ecu & remap, front strut brace, new wishbones, bonnet/boot respray.
 
Back
Top