• Please only use these forums for blogs, they are not a discussion forum

Sam's Honda Civic EK3 | Project Rated or Hated |

Hi everyone,

As the March has gone to a new home, I thought it was time to introduce my new project to you all. I've been wanting a civic for quite a long time and after a lot of searching I found and bought this.

It's a '97 Civic EK3, only 68k miles, 2 previous owners and a full service history from new.
It needs a little bit of tlc on the bodywork, there's a few small marks here and there but mechanically and inside it's in great condition.

I have a few big plans for it, and I shall keep this updated as it progresses. In the meantime, here's some pictures of it from when I picked it up..

IMG_0629.jpg


IMG_0631.jpg


IMG_0633.jpg
 

MaxK11C

Micraless
Moderator
Social Brand Manager
Oooohhhh yes. I'll be keeping a close eye on this.


'Sent from my bed using paper planes'
 
OP
OP
SK193
I haven't updated this in a little while.

I bought some MeisterR Zeta-S Super Low coilovers from Aaron's EK Civic, (Last months Fast Car cover car)

IMG_0708.jpg


And some neo-chrome Skunk2 lower control arms and a neo-chrome ASR subframe brace.

IMG_0710.jpg
 
OP
OP
SK193
Coilovers fitted.

IMG_0745.jpg


IMG_0748.jpg


They were put on the highest setting just to fit them as I wasn't sure how much it was going to lower it by but it'll definitely be coming down soon!
 

MaxK11C

Micraless
Moderator
Social Brand Manager
Pfffft. If the sills aren't scraping, you're not doing it right. ;)


'Sent from my bed using paper planes'
 

MaxK11C

Micraless
Moderator
Social Brand Manager
"Backbox a bit big" it's a Honda. It's never big enough!


'Sent from my bed using paper planes'
 
looking good,i had one of these as a first car..get that rear spoiler tilted ;) will make a big difference i had it done to mines looked like this..
f3895122.jpg
 
OP
OP
SK193
looking good,i had one of these as a first car..get that rear spoiler tilted ;) will make a big difference i had it done to mine
Thank you. I've already got mine tilted, I just haven't got around to updating it on here. It does look a lot better :) I'm thinking of getting a carbon Spoon spoiler soon.


Sent from my iPhone using Tapatalk
 
OP
OP
SK193
A few little things for now.

Fitted my spoiler tilt kit, looks so much better than standard.

IMG_0771.jpg


Got some D2 Racing rear camber arms.

IMG_0765.jpg


And US Racing front camber arms.

IMG_0795.jpg


Bigger & better update coming soon!
 

MaxK11C

Micraless
Moderator
Social Brand Manager
Those wheels are just perfect. This build is great, keep it up.


'Sent from my bed using paper planes'
 
OP
OP
SK193
Test fit of the new wheels.

Front:

IMG_0815.jpg


IMG_0817.jpg


Also tried one of the 9J et0's on the front too. I think it'll work at some point..

IMG_0821.jpg


Rear:

IMG_0823.jpg


IMG_0825.jpg


A rough idea of how much camber will be needed on the rears.

IMG_0827.jpg
 
OP
OP
SK193
Wheels on. How they sat without any added camber.

Front:

IMG_0857.jpg


Rear:

IMG_0859.jpg


Lowered the coilovers down a bit and adjusted the camber to get the wheels fitting right.

IMG_0861.jpg


IMG_0863.jpg


IMG_0865.jpg
 
OP
OP
SK193
Apologies for the lack of updates again, better ones to come soon!

For now here's some photos I got of it with a friends mk2 Golf as he was trying on my old Rota wheels.

IMG_0871.jpg


IMG_0875.jpg


IMG_0876.jpg


Also decided to go lower the coilovers more, but as I found out, it was pretty much undrivable as it dragged constantly. I'll get it to work after some adjustments though.
(excuse the state of the car, the bodywork is to be done next)

IMG_0897.jpg


IMG_0893.jpg


IMG_0890.jpg


IMG_0900.jpg


IMG_0901.jpg


IMG_0902.jpg
 
OP
OP
SK193
Got myself some new bits & pieces ready to get her looking a bit more presentable.

Backyard special front lip & Type R rear lip.

IMG_0933.jpg


New US size reg plates.

IMG_0925.jpg


Skunk2 neo-chrome gearknob.

IMG_0908.jpg


US Racing dual bend short shifter.

IMG_1002.jpg


Kode dished suede steering wheel & NRG thin quick release hub.

IMG_1004.jpg
 

Tchaaa

Buy & Sell Member
Got myself some new bits & pieces ready to get her looking a bit more presentable.

Backyard special front lip & Type R rear lip.

New US size reg plates.

Skunk2 neo-chrome gearknob.

US Racing dual bend short shifter.

Kode dished suede steering wheel & NRG thin quick release hub.

Just got myself one of those Skunk2 knobs for my civic, having to send it back and re-order though as I ordered a brand new gunmetal 6 speed one, and got sent a black, used, 5 speed one... bloody ebay!

But I will say, they are pretty good - didn't realise how something as simple as a new gear knob could encourage you to drive like a lout!
 
OP
OP
SK193
Just got myself one of those Skunk2 knobs for my civic, having to send it back and re-order though as I ordered a brand new gunmetal 6 speed one, and got sent a black, used, 5 speed one... bloody ebay!

But I will say, they are pretty good - didn't realise how something as simple as a new gear knob could encourage you to drive like a lout!
Ah that's bad luck, I looked around at quite a few before I bought mine.
Yeah the weight and shape of them makes changing gears feel so much better!
 
OP
OP
SK193
It was time to get the bodywork sorted and looking better.

Removed the bumpers ready to get them smoothed and sprayed.

IMG_0935.jpg


IMG_0937.jpg


Had a play around with spacers to see what possible future fitment I could get. This was 9J et-18!

IMG_0939.jpg


As the arches needed doing anyway, I flared & smoothed them for a more clearance/a better look.

IMG_0949.jpg


IMG_0951.jpg


One side repaired and prepped for paint.

IMG_0963.jpg
 
Last edited:
OP
OP
SK193
A few last pictures of the prep work and the fitment with the new flared arches.

Front:

IMG_0965.jpg


IMG_0967.jpg


IMG_0969.jpg


Rear:

IMG_0971.jpg


IMG_0973.jpg


I had to drive it about 10 miles to the garage like this, it got some interesting looks on the way.

IMG_0975.jpg


IMG_0977.jpg


IMG_0979.jpg
 
OP
OP
SK193
Just after the paint went on, before the final coat of lacquer.

IMG_0982.jpg


IMG_0984.jpg


Spraying all done and after it had been flatted and polished. Really pleased with how it came out.

IMG_0988.jpg


IMG_0992.jpg
 
Top