RS5F family gear ratios

Enuo

Glorified Electrician
RS5F41A: '92-'98 CG10DE gearbox (160mm clutch)

1st: 3.412:1
2nd: 1.958:1
3rd: 1.323:1
4th: 1.028:1
5th: 0.850:1
Rev: 3.385:1
Fin: 4.050:1

RS5F30A: '98-'00 CG10DE gearbox (180mm clutch)

1st: 3.062:1
2nd: 1.826:1
3rd: 1.207:1
4th: 0.927:1
5th: 0.756:1
Rev: 3.417:1
Fin: 4.471:1

RS5F30A: CG13DE gearbox (180mm clutch)

1st: 3.333:1
2nd: 1.955:1
3rd: 1.286:1
4th: 0.927:1
5th: 0.756:1
Rev: 3.417:1
Fin: 3.895:1

RS5F30A: '91-'95 GA14DE gearbox (180mm clutch) (assumed same for '95-'98 also, change to 190mm clutch occurred from '98-'00 and ratio changes may also have occurred)

1st: 3.333:1
2nd: 1.955:1
3rd: 1.286:1
4th: 0.902:1
5th: 0.733:1
Rev: 3.417:1
Fin: 4.167:1

RS5F31A: '91-'95 GA16DS gearbox (190mm clutch)

1st: 3.063:1
2nd: 1.826:1
3rd: 1.207:1
4th: 0.902:1
5th: 0.756:1
Rev: 3.417:1
Fin: 4.167:1

RS5F31A: '91-'00 GA16DE gearbox (190mm clutch)

1st: 3.063:1
2nd: 1.826:1
3rd: 1.286:1
4th: 0.975:1
5th: 0.810:1
Rev: 3.417:1
Fin: 4.167:1
 
Does anyone know if the First facelift 1.0 gearset can be used with the 1.3 diff? Would give me the leggy 1-3rd am after :)
Also, feel free to add others, such as the superturbo and 5 speed MA boxes if you have them, I'll edit into post. Remember, 4 speeds are RS4F, so feel free to start a new thread *5 speed elitist*
 
Last edited:
Does anyone know if the First facelift 1.0 gearset can be used with the 1.3 diff? Would give me the leggy 1-3rd am after :)
Also, feel free to add others, such as the superturbo and 5 speed MA boxes if you have them, I'll edit into post. Remember, 4 speeds are RS4F, so feel free to start a new thread *5 speed elitist*
interchangeability is limited by the fact that that the final drive pinion is integral with the 2nd motion shaft eh andy (1 piece component)
and the 16de has a 5th gear lower overall ratio than ga14 ??
 
.
 

Attachments

  • 1401263972875.jpg
    1401263972875.jpg
    44.6 KB · Views: 549
1401264974959.jpg

There we go :)
Yeah, 1.6 is shorter, wierd huh. Maybe the 1.6 revs slightly more happily than the 1.4?
 
according to that, these are the engine-to-hub 5th gear cruising ratio,s then andy

3,44
3.38
2.94
3.05
3.15
3.37

so a GA16 g/box cruises no better than all but the preface 1.0 ?
 
I guess, everyone who's fitted that box to a GA has been disapointed according to Ed (iirc), just has a beefier diff.
 
Also, 175/65R13 is tyre size for GA15, 185/65R14 is GA16 tyre size, a fair bit more diameter :)
 
Instead of swapping diffs, could you take the gears for 1st, 2nd and 3rd off a 1.0 box and swap into a 1.3 box @frank?
 
Back
Top