Rear brake drum rebuild with useful where does it all go photos

I got a rare sunny day in Belfast and decided to install the new wheel cylinders, the car passed it's19th mot a fortnight ago but I like everything to be right, the bleed nipples were seized and one of the brake pipes was very dodgy, the inspector probably let it go due to all the other effort put into it? I replaced the pipes to the flexies and aggressively took the back plate down to metal with a grinder to give the paint a grip, caliper paint on the out side and basic black in the workings, the photos should be in order from drivers, offside assembley to the passengers nearside assembly. Biggest tip of all, get the half shaft off and the rebuild is a lot easier
 

Attachments

  • WP_20181014_001.jpg
    WP_20181014_001.jpg
    1.5 MB · Views: 212
  • WP_20181014_002.jpg
    WP_20181014_002.jpg
    1.4 MB · Views: 206
  • WP_20181014_14_53_06_Pro.jpg
    WP_20181014_14_53_06_Pro.jpg
    1.5 MB · Views: 205
  • WP_20181014_14_57_20_Pro.jpg
    WP_20181014_14_57_20_Pro.jpg
    1.5 MB · Views: 207
  • WP_20181014_14_57_15_Pro.jpg
    WP_20181014_14_57_15_Pro.jpg
    1.5 MB · Views: 218
  • WP_20181014_16_03_59_Pro.jpg
    WP_20181014_16_03_59_Pro.jpg
    1.4 MB · Views: 199
  • WP_20181014_16_43_09_Pro.jpg
    WP_20181014_16_43_09_Pro.jpg
    1.9 MB · Views: 209
  • WP_20181014_16_39_32_Pro.jpg
    WP_20181014_16_39_32_Pro.jpg
    1.8 MB · Views: 210
  • WP_20181014_17_36_28_Pro.jpg
    WP_20181014_17_36_28_Pro.jpg
    1.6 MB · Views: 184
  • WP_20181014_18_09_01_Pro.jpg
    WP_20181014_18_09_01_Pro.jpg
    1.6 MB · Views: 224
Top