• Please only use these forums for blogs, they are not a discussion forum

Porks supercharged k11 project

OP
OP
pork

pork

Club Member
This was done today......

c594dbb7380419b0b07374502cf5e18f.jpg


6bd2322314f0d1bf4f4797cb1a75fd8d.jpg


86b3984e3b9f8537d475306854bbee50.jpg




Just needs wiring up now

Slight issue with clearance though lol

Bonnet bulge is only choice

3bc1dc1701e57fe48534d129f9f9cdab.jpg



Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
I wanna put my swirl pot/bigger pump and filter somewhere......this thing...


0d1edde13dc1add3acfdf4e803ebd3cb.jpg



.....if I can get away with it, if like to it in the engine bay, were the battery was, that way I don't have to remove the back seats to plumb this in the back if the car

Is there any reason why I couldn't/shouldn't do this?


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Forgot to weld on the boss for the lambda
Lost the old boss, so tapped a big stainless nut that was laying about to m18

The boss on eBay were £10 Sid that!

77380c9d6d7ef97a20a0bc7089888753.jpg


5f37a0df12c10b36d9dac29b1e377b27.jpg



Pissig down now so fitting will have to wait


Sent from my iPhone using Tapatalk
 
I wanna put my swirl pot/bigger pump and filter somewhere......this thing...


0d1edde13dc1add3acfdf4e803ebd3cb.jpg



.....if I can get away with it, if like to it in the engine bay, were the battery was, that way I don't have to remove the back seats to plumb this in the back if the car

Is there any reason why I couldn't/shouldn't do this?


Sent from my iPhone using Tapatalk
It's just usually fitted at the rear near the tank as its cooler and safer. It doesn't really matter though unless you're bothered about a higher fuel temperature. Do you really need the swirl pot? You're not really ever going to be sucking air are you? Looks good though. I suppose when things look this good, then why not fit it eh :)
 
OP
OP
pork

pork

Club Member
Had it spare from last car.

I need a bigger pump, and the one I've got is external, and beings this car is being made from stuff I have laying about, and not spending anymore cash, I have to use it


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Gaskets belts and throttle done this afternoon .....broke my rocker cover!!!

Not sure if any plastic has got into the chain
10eb32da03942659a5fdcef44d91f750.jpg


ce8feb33ac008b491e5cd7fbeab692e5.jpg



Having trouble fitting this gear linkage,

Could someone send me pics of the way the stick is connected to the body, and a pic of how the steady bar fits, swear there's bits missung


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Cheers,,

The steady bar bush seems to talk and skinny
looks like it should be wider and shorter if that mages sense lol


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Anyone got a spare rocker cover they wanna sell(cheap) / donate lol


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Your a star mate, how you wanting money's, il chuck a bit in extra for your time ;)




Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Started wiring up the connectors to the ecu

Don't panic, this is just to make sure they. In right place, then il solder and cover the bare wires


4b498c546659a8eda5ce035cf4e00d75.jpg



Also done a very accurate technical drawing of the section of bonnet I need to modify to accommodate the top mount inter cooler and supercharger

875ff6abe1d7b6d1088491ec52415872.jpg



Sent from my iPhone using Tapatalk
 
All black wires not make it confusing?? I say cut the bumper along the slight elevation thats already there and raise the whole center section wouldnt be too noticable
 
OP
OP
pork

pork

Club Member
Black is all I had lol.

It's not that hard really to wire up, done this a few times now,

Just do 1 wire at a time and it's pretty hard to mess it up


Would take some suggestions on a bonnet scoop though for the intercooler, don't want anything to 'bad boy)


Sent from my iPhone using Tapatalk
 

solarice

Ex. Club Member
I take it removing the bonnet support pieces from inside won't give you the clearance? Just before you saw a hole in the bonnet :D
 

solarice

Ex. Club Member
Bit of a shame...if only for all the extra work. :)

Though i suppose you'd be cutting it anyway for the intercooler so a little extra isn't that much of a headache.
 

solarice

Ex. Club Member
Yeah you'd probably need to raise the whole thing along it's current shape, if you still want it kinda stock looking.

Nissan should have really foreseen this tbh :D
 
OP
OP
pork

pork

Club Member
The gear linkage I've got doesn't fit right, I need this part solved before i start anything else really.


Here's my mount....

b6bb6388ed52a5f567e037ccaa02f31c.jpg



And here's my steady bar, that doesn't fit into the stud once the gear linkage is on ?!

f15bd80b418df60a302fd87dd2d16919.jpg



Am I missing some parts, or is this part wrong??


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Anyone help with the above?

Don't wanna start a whole thread about it


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
God damnit!!

Thought they were all the same (I did ask lol)


Anybody got the correct gear linkage

Preface lift cg10


Sent from my iPhone using Tapatalk
 
OP
OP
pork

pork

Club Member
Gas anyone got a preface lift dizzy engined cg10 gear linkage?!?

I'm getting desperate now, willing to do sexual favours in return


Sent from my iPhone using Tapatalk
 
Top