• Please only use these forums for blogs, they are not a discussion forum

Porks poopercharger project

pork

Club Member
Got a new project, not a micra, but I do enjoy this place so thought I'd share it.

Putting the engine from the old k10 into an old mini :)

Joint effort between me and my mate Dan, he has a garage lol

Car will be built on the odd weekend we get together and drink beer

Here's the car from how it started

96265141da07ffb40f66ba35da735a7a.jpg


No engine

e52eb7c442b8bb61406698ed459912e7.jpg


No boot or floor
0c39582ecd27aa10f978d40436d64582.jpg



Remove subframe

0ba7b283cc2e6ecbd82cc4d7cf88a228.jpg


Chop and stock bits on to mount a cg13

07e9c29041e532f5d0cced0ccacea6a0.jpg

eec533216b9c09e572d31d202a35eef0.jpg

ba382ff21bda7f3292515bf0607b7ddc.jpg

859e6ce63bee4e83154ea62a35aa771b.jpg



Sent from my iPhone using Tapatalk
 
Add boot floor

9b91792ffc05d901ef8c60d89ee43fcb.jpg


Repair rear subframe

80831ab246cf53087f5c7c6786cdfab1.jpg



This is how I'm mounting the charger:

Chop up an old inlet

0f78b1c52e0c0aefafba022518f7f05d.jpg


Bit of big alu pipe

4594ae4e2eded268042c641aef7107dd.jpg


5557a746f2cf3766879dd93aa8871337.jpg


Then stick together

ba0d0d825d6d02eece5312d0b5299ca8.jpg

cd0fa30164d2b6a45bca8eef757cc9ff.jpg

be5f9f72bfeaf3ba66d2fc71061ce464.jpg


6fdee59135130cdf7df0267ef20d9ff9.jpg


Boot finished

81a7fe7e1672cb9ccb02aa221daa1bd2.jpg


From subframe finished

c39385c8c471b16ff8041865bca1a4fc.jpg


Exhaust almost done

df5dd1a3a0752dbc1279e2280ed1cef9.jpg


Ooo shiny

4939089fed6385b377804f398c482d46.jpg


d107f6013271d50970546474348d22fb.jpg



Sent from my iPhone using Tapatalk
 
A while yet lol

Been doing a bit of work on it today

Tons to do!!


Sent from my iPhone using Tapatalk
 
Until she gets to a certain age. My girls are 14 and 15 so it's seriously uncool. Makes it even more fun :)

Sent from my HTC Desire 816 using Micra Sports Club mobile app
 
Il take it mate, I did have a plastic one, but put a hole in it!

What would you want for it?


Sent from my iPad using Tapatalk
 
Beings as there's no space, I'm gunna need to run the water pump of the larger pulley on the crank

Will the pump be ok?

9d05cd6896c84e66daac6c253ed04b06.jpg



Sent from my iPhone using Tapatalk
 
I can't use the water pump tensioner coz it hits the subframe, so I'm having a pulley Made that will be inline with the larger crank pulley and hold the wider belt.

The black pulley in the pic is roughly where the alternator will go and tension the belt (albeit tucked in the wing of the car and ran backwards)


Sent from my iPhone using Tapatalk
 
Received my cover, cheers Tom!

This was the old one I broke, think I managed to get all the pieces out, hope so!!

c95ab87a8d2ec04d613fbcc65f9c84fa.jpg


Charger pulley aligned, and charger mounted into place, did try cutting the outlet hole in the manifold with a jigsaw, but snapped the blade lol

48ff1d9aef400c87dda1c7e58475a6e8.jpg


Just waiting on new water pump pulley to be finished


Sent from my iPhone using Tapatalk
 
Just seen this your welcome bud she's a bit shabby but nothing that a bit of degreaser and a can of paint won't fix came off my original cg13
 
Is there any difference between the plastic cam cover rubber seal/gaskets, and the metal can cover rubber seal/gasket

The one I have doesn't look right for this metal cam cover,

Mines a dizzy model


Sent from my iPhone using Tapatalk
 
As far as I know there two types, the coilpack and dizzy rocker cover gasket ... The coilpack one doesn't have the extension for the dizzy on the top right
 
Ahh ok,

Just doesn't look like it would've seat properly in the recess on the cover

Thought I'd ask before I bolt it all together


Anyway, small update,

Cover painted, alternator brackets finished and cutting hole in manifold for charger outlet......massive chore!!

d0dbe3874bc96d845aed3648852613c2.jpg

521344e786bef6262a9743c5dc0cccda.jpg

b154ce3aa1086ea586181705d11fd18f.jpg

f5aa48eb6988e3a443978e2fbbdf0486.jpg



Sent from my iPhone using Tapatalk
 
Is there any difference between the plastic cam cover rubber seal/gaskets, and the metal can cover rubber seal/gasket

The one I have doesn't look right for this metal cam cover,

Mines a dizzy model


Sent from my iPhone using Tapatalk

The plastic cam cover gaskets go around the bolt holes from what i remember mate, the metal ones dont.
 
Cool, I've ordered another one now anyway, just to make sure lol

Thought it didn't look right!


Sent from my iPhone using Tapatalk
 
Need the speedo cable and gearbox drive doodad for a pre face lift cg10 if anyone has obe


Sent from my iPhone using Tapatalk
 
Beings the car was bought in pieces, we've Been going through the box if bits that came with it and fitting what's there, not bad stuff really

3628977fc009386eaf5849ee047be31e.jpg


a43f8c11419307e8079e0344fa96f3e2.jpg


0c56fa757369d351f3d6db6fdf56658c.jpg

e4400cad2794b624115238990b91dafe.jpg


c3c612dc20f3d57a899fe81a59970622.jpg



Sent from my iPhone using Tapatalk
 
Few hours on car today

Brakes servo relocation sorted out, operated by my beautiful assistant lol



Clutch pedal made too

d7cf150148a862e9c6a6d43cb3c9d94b.jpg


dacce88989014db68017c79dd5a8107e.jpg




Sent from my iPhone using Tapatalk
 
Well, the 16v mini site has had a boo boo, and lost everyone build threads, good job I've kept one her otherwise I wouldn't have a record of anything!!

Anyway, clutch cable sorted, used a k10 cable coz it's got a nice bend in it which clears the charger nicely, had to weld on a plate to the bulkhead to stop it flexing......plus I drilled the first hole too big lol!!

9e3ccdc385f6b5b2fb332a55e51c1acb.jpg

c7336360bc961fa0c9ce9e0931114106.jpg



Sent from my iPhone using Tapatalk
 
I'm doing the gear stick next, it's a cg10 stick

Is there any sort of rubber bush I need to attach to the car

All I've got is the gear stick/selector/steady bar, I bought it of eBay so didn't get s chance to see how it's mounted


Sent from my iPhone using Tapatalk
 
I used one of the small mini rubber cotton reel exhaust mount rubbers on the back of the gearshift arrangement with a bracket picking up 2 of the three bolt holes I found in the tunnel (probably from remote/rod change).
 
Inspired by all the cool minis at retro show at Santa pod, decided to pull my finger and get back on the car

Injection pumps and stuff sorted with return welded onto the tank

d33823cf34eff8a6ef71fbe89331d6bc.jpg


Brake lines done

b36546e9435125649688362acfcbe5e9.jpg


Should have this soon too

ac27fcf78e7a77292ed4791e705e4e0e.jpg



Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
 
Ecu wiring 99% done with relays fuses and switches

f79a31c274b5e0ddd2eb1db54095423e.jpg





Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
 
Tonight's activities........maybe should of used more colours lol
But the black was free

372b72a22b8e53977f21cce66d2da082.jpg



Sent from my iPhone using Tapatalk
 
Rad on
5ee91aeb661b81a59d3b7db16bd4e115.jpg




Just dropped off mini/micra shafts to engineer bloke to make up some sleeves for me :)


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
 
Back
Top