• Please only use these forums for blogs, they are not a discussion forum

Porks bike carbs and boost project

Turned this lot....

3d520425249a6bf139ddc7c229b28195.jpg


.....to this

5cf44aa62b93579fe9e243a49da965bf.jpg

374b024735a0bec238f086aebcfbdd7e.jpg





It'll sit under dash on floor just in front of gear lever

Idea was to have a plug and play box which
Holds ecu, widenband O2, relays and fuse holder, that I can transfer between cars, with out having to dismantle and rewire each time




Sent from my iPhone using Tapatalk
 
I had a similar idea but not interchangeable and no gauges etc
What size box did you use Neil?
Every one I've seen seems too small
 
300x 200 from a electrical factors, £10

Got boost, tacho and AFR gauge, all it needs it 12v supply and its done

This way if I smack up the car, or it rusts out, just plug it into new one

I'm just playing with stuff at the mo as I don't actually have a car lol
 
If love one!

Why, you gunna donate it to me lol


Sent from my iPhone using Tapatalk
Lol
I have buggered my arm up and just can't work on it until it heals (which could be months)
Have done loads to it but it's just gonna sit here now. I need to get the bodywork done before the summer is thro as I have no garage but just can't see it happening at the moment. Sad.com :(
 
Dam!

Would love to have one, but always way to expensive.

It would a happy home with me ;)


Sent from my iPhone using Tapatalk
 
So without spending any new money and going through the pile of scrap parts I have,

This will be the engine sorted.....


cbdb053117bc10d769ef19ded386dff9.jpg

1cbfb1b41eba790156242d829978dafd.jpg

db4f6bdf99aaded2bf2cfd98bac883fc.jpg



Sent from my iPhone using Tapatalk
 
I'm having trouble coming up with a idea of how to make this black idler pulley into a sprung belt tensioner

Any suggestions

ac26ea707cd52ad0ef6e5b40f353b7d8.jpg



Sent from my iPhone using Tapatalk
 
i would extend a sandwich plate under the s/c neil, and use that bracket you have as a stay
so, a slot facing you in the pic, close to the top pulley for max belt contact :)
 
Can anyone tell me the dimensioned of the polo coilovers?

Just an overall size?


Sent from my iPhone using Tapatalk
 
Beings as I still don't have a car yet,

......could do us a favour and measure the width of the suspension turrets lol


Sent from my iPhone using Tapatalk
 
Back
Top