Oil Pressure Switch

Hi, would like to know what socket size to pull out the oil pressure switch on my 1.3 K11. Thanks

Sent from my SM-G960F using Tapatalk
 
OP
OP
monallyza
Tried 24, 25 and 1". 27 is too big. Would mean 26 but there's no size that in metric. Any ideas what other tool I can use or maybe in imperial socket sizing. Attached photo.
50d597922e9c310171ead0e3545c0098.jpg


Sent from my SM-G960F using Tapatalk
 
OP
OP
monallyza
Thanks for your reply. Could you tell from the photo if this is the original switch or some replacement? Sockets I used were deep BTW.

Sent from my SM-G960F using Tapatalk
 
OP
OP
monallyza
The hex corners look different. Mine might already be a replacement that's why it's not 24mm. Hope someone can help what's the size or how can I pull it out. Space is too tight.

Sent from my SM-G960F using Tapatalk
 
Your right yours looks a bit different, almost like a double hex...

There's a 26mm spanner in our tool box... I used a pair of calipers the closest I could get in imperial was either 1" or 1 1/16"
 
OP
OP
monallyza
Needed a 26mm deep socket but was able to force 1" to pull out this type of sender. Replaced with normal 24mm sender. All sorted, no more oil leaks.
c991ebf05635bae8ae447d3bb385e0bf.jpg


Sent from my SM-G960F using Tapatalk
 
Top