'Nizonda' Pao K20

Hi Ya'll

Wanted to share this project with you all.

I purchased this Pao through Mitsui Co Ltd in Japan last August and i've been sitting on it for a while deciding what to do with it, this is my 5th Pao and wanted to make it a bit quicker and sound a bit different so decided to fit a Honda K20 engine/box and fit a set of 45mm Jenvey's with huge trumpets as I love the growl and thought with having a metal dash the sound would come through a treat, I had a lightened flywheel and competition clutch from my earlier EP3 and they all fit a treat. The conversion is being done by Gavin at Gsportscars here in Belfast and he's doing a proper job on it, im very pleased with his quality of work and he's got bundles of knowledge. Car is really straight but did have previous paint in Japan and was a couple of different colours of Nissan Ivory so will get it painted, front & rear bumper delete with all access holes filled and smoothed, roof bars deleted, will be slammed 75mm all-round on coilovers, want the slammed smooth look, interior all out for cleaning, seats all stripped and put through the washing machine with Vanish powder, came up like new, Just to give you a quick breakdown of cost so far:

Pao £1600
Shipping Insurance £40
Shipping to Dublin £950

Port of Dublin services
Clearance £45
Port Vat £25
T1 bond £75 (T1 bond req by UK HMRC when you move car from Dublin ➔ Belfast)

HMRC UK charges
Customs Import Vat £597.76
Customs Import Duty £260.80
Customs Entry £45
Vat deferment fee £25
Customs Bond Fee £75

Transport the car from Dublin ➔ Belfast
£150 (fully insured)
 

Attachments

  • 20190828_110113 (1).jpg
    20190828_110113 (1).jpg
    3.2 MB · Views: 287
  • 23.jpg
    23.jpg
    3.2 MB · Views: 257
  • 20191120_123340.jpg
    20191120_123340.jpg
    567.1 KB · Views: 250
  • 20191120_123332.jpg
    20191120_123332.jpg
    275.5 KB · Views: 239
Last edited:
OP
OP
Keyzie
Im having to get the inlet manifold made to suit the Jenvey's as mine are a 2 bolt fixing, Steve BOGG off the BOGG Bros is sorting that, meant to say car is very very good underneath but did req small patches around seat mounts on drivers side, rear quarters are excellent and sound.
If anyone is looking for something special/odd or super super rare have a look at www.tc-v.com (former Trade Car View) they even got 1972 GTR Skylines on there but NUTTY money!!
 

Attachments

  • 20191120_130045.jpg
    20191120_130045.jpg
    759.4 KB · Views: 250
  • 20200722_093121.jpg
    20200722_093121.jpg
    3.5 MB · Views: 254
  • 20200727_132612.jpg
    20200727_132612.jpg
    1.9 MB · Views: 264
  • 20200727_132619.jpg
    20200727_132619.jpg
    1.3 MB · Views: 245
  • 20200727_132631.jpg
    20200727_132631.jpg
    917 KB · Views: 275
  • 20200727_132722.jpg
    20200727_132722.jpg
    2.2 MB · Views: 256
  • 20200727_132901.jpg
    20200727_132901.jpg
    3.3 MB · Views: 223
  • Pao front prep.jpeg
    Pao front prep.jpeg
    126.8 KB · Views: 251
  • 20171231_140303_2.jpg
    20171231_140303_2.jpg
    1.7 MB · Views: 243
  • Jenvey Distance.jpeg
    Jenvey Distance.jpeg
    242 KB · Views: 238
  • 5.jpg
    5.jpg
    3 MB · Views: 269
  • 21.jpg
    21.jpg
    3.3 MB · Views: 246
  • 22.jpg
    22.jpg
    3 MB · Views: 265
  • 39.jpg
    39.jpg
    3.6 MB · Views: 224
  • 20190214_170114.jpg
    20190214_170114.jpg
    191.9 KB · Views: 227
  • 20191113_121504.jpg
    20191113_121504.jpg
    1.2 MB · Views: 198
  • 20191113_124758.jpg
    20191113_124758.jpg
    980.2 KB · Views: 216
  • 20191113_124808.jpg
    20191113_124808.jpg
    562 KB · Views: 200
  • 20191113_124928.jpg
    20191113_124928.jpg
    951.3 KB · Views: 204
  • 20191113_124940.jpg
    20191113_124940.jpg
    435.7 KB · Views: 206
  • 20191113_124945.jpg
    20191113_124945.jpg
    431.1 KB · Views: 219
  • 20191113_133502.jpg
    20191113_133502.jpg
    1.1 MB · Views: 212
  • 20191113_133512.jpg
    20191113_133512.jpg
    1.3 MB · Views: 229
  • 20191113_133523.jpg
    20191113_133523.jpg
    890.9 KB · Views: 217
  • 20191113_133550.jpg
    20191113_133550.jpg
    856 KB · Views: 220
  • 20191113_133604.jpg
    20191113_133604.jpg
    960.8 KB · Views: 192
  • 20191113_133614.jpg
    20191113_133614.jpg
    547.9 KB · Views: 209
Last edited:
OP
OP
Keyzie
Few more pic's n info. Sourced a steering rack from a K10 as don't want power steering, small aluminium base plate cut to mount manual shifter managed to use cables & all linkages/shifter from the donor Honda, engine mounts all sorted, Pao's in excellent condition in and around engine bay, all metal 100% sound with no rust.

Exhaust and electrics/ecu all still to do, will probably use Syvecs plex lovely small bit of kit.

Here's one I sold earlier



Thanks for your interest.
 

Attachments

  • 11.jpg
    11.jpg
    2.6 MB · Views: 243
  • 17.jpg
    17.jpg
    2.6 MB · Views: 238
  • 16.jpg
    16.jpg
    3.1 MB · Views: 240
  • 12.jpg
    12.jpg
    2.7 MB · Views: 219
  • 13.jpg
    13.jpg
    2.8 MB · Views: 249
  • 14.jpg
    14.jpg
    2.8 MB · Views: 240
  • 18.jpg
    18.jpg
    3.1 MB · Views: 251
  • 24.jpg
    24.jpg
    2.8 MB · Views: 252
  • 19.jpg
    19.jpg
    3.2 MB · Views: 255
  • 30.jpg
    30.jpg
    2.8 MB · Views: 236
  • 25.jpg
    25.jpg
    1.9 MB · Views: 229
  • 28.jpg
    28.jpg
    2.9 MB · Views: 250
  • 31.jpg
    31.jpg
    3.2 MB · Views: 249
  • 29.jpg
    29.jpg
    2.5 MB · Views: 240
  • 32.jpg
    32.jpg
    3 MB · Views: 230
  • 33.jpg
    33.jpg
    2.5 MB · Views: 231
  • 9.jpg
    9.jpg
    2.6 MB · Views: 206
  • 36.jpg
    36.jpg
    2.7 MB · Views: 220
  • 38.jpg
    38.jpg
    2.9 MB · Views: 218
  • 6.jpg
    6.jpg
    2.7 MB · Views: 231
  • 8.jpg
    8.jpg
    2.3 MB · Views: 226
Last edited:
OP
OP
Keyzie
Im using ACF-50 to treat all the seams, gets good reviews and nows the time to do it, will be a 'dry day car' and will be garaged 99% of the time due to living in Ireland. Picked up a Figaro wheel and painted couple of bits, www.automotivepaintsupplies.ie made me up a couple of Nissan Ivory aerosols which have come in a treat.
 

Attachments

  • 20200728_172133.jpg
    20200728_172133.jpg
    1.3 MB · Views: 194
  • 20200729_122510.jpg
    20200729_122510.jpg
    2.7 MB · Views: 172
OP
OP
Keyzie
Exhaust manifold blasted n cleaned, wrapped, exhaust will be made-up over nx few days, driveshafts have been cut pinned and sleeved by lathe (I won't be ragging this little thing off the line as im 56 and mechanically sympathetic and treasure all my toys, just looking forward to hearing them Jenvey's sucking, hoping at about 160bhp & 750KG it should still be quite nippy, it's more about induction noise than speed and bhp with this project.
 

Attachments

  • 20200730_131124.jpg
    20200730_131124.jpg
    2.8 MB · Views: 171
  • 20200730_131136.jpg
    20200730_131136.jpg
    3.3 MB · Views: 181
  • 20200730_131200.jpg
    20200730_131200.jpg
    2.9 MB · Views: 190
  • 20200730_131223.jpg
    20200730_131223.jpg
    3.1 MB · Views: 180
  • mani4.jpg
    mani4.jpg
    2.3 MB · Views: 176
  • mani5.jpg
    mani5.jpg
    2.4 MB · Views: 180
  • mani6.jpg
    mani6.jpg
    2.8 MB · Views: 183
  • mann.jpg
    mann.jpg
    3 MB · Views: 180
  • shaft1.jpg
    shaft1.jpg
    2.3 MB · Views: 175
  • shaft2.jpg
    shaft2.jpg
    2.3 MB · Views: 203
Last edited:
OP
OP
Keyzie
Stripped the seats and put some 1" thick foam under the original shaped seat then used cable ties (not visible) to reattach, washed them at 30 degrees using Vahish powder just to get rid of 30 year old dust, came up a treat.
 

Attachments

  • 20200801_142227.jpg
    20200801_142227.jpg
    4.1 MB · Views: 188
  • 20200801_142313.jpg
    20200801_142313.jpg
    2.2 MB · Views: 181
  • 20200801_142324.jpg
    20200801_142324.jpg
    1.9 MB · Views: 200
  • 20200801_142333.jpg
    20200801_142333.jpg
    1.8 MB · Views: 185
  • 20200801_142340.jpg
    20200801_142340.jpg
    1.9 MB · Views: 175
OP
OP
Keyzie
Driveshafts mated, pinned n sleeved.
 

Attachments

  • joint.jpg
    joint.jpg
    1.9 MB · Views: 196
  • lte.jpg
    lte.jpg
    3.2 MB · Views: 182
  • sde.jpg
    sde.jpg
    2.5 MB · Views: 184
  • shaft.jpg
    shaft.jpg
    2.5 MB · Views: 173
  • shaft3.jpg
    shaft3.jpg
    2.7 MB · Views: 180
  • shf.jpg
    shf.jpg
    3.5 MB · Views: 187
  • qw.jpg
    qw.jpg
    2.4 MB · Views: 190
  • 11.jpg
    11.jpg
    2.2 MB · Views: 181
  • ww.jpg
    ww.jpg
    2.3 MB · Views: 183
OP
OP
Keyzie
Got a couple of Pao bits if anyone's interested.......Front and Rear bumpers (no dents).......Both wing mirrors c/w little bit of sunburn.......Radio
Thanks for yr interest.
 

Attachments

  • 20200806_165609.jpg
    20200806_165609.jpg
    794.1 KB · Views: 177
  • 20200806_165616.jpg
    20200806_165616.jpg
    627.4 KB · Views: 174
  • 20200806_165625.jpg
    20200806_165625.jpg
    323.7 KB · Views: 169
  • 20200806_165705.jpg
    20200806_165705.jpg
    1.4 MB · Views: 187
  • 20200806_165713.jpg
    20200806_165713.jpg
    1.7 MB · Views: 173
  • 20200806_165740.jpg
    20200806_165740.jpg
    319.1 KB · Views: 171
  • 20200806_165756.jpg
    20200806_165756.jpg
    346.6 KB · Views: 178
  • 20200806_165818.jpg
    20200806_165818.jpg
    1 MB · Views: 176
  • 20200806_172452.jpg
    20200806_172452.jpg
    880.2 KB · Views: 174
  • 20200806_172525.jpg
    20200806_172525.jpg
    1.2 MB · Views: 172
  • 20200806_172535.jpg
    20200806_172535.jpg
    281.1 KB · Views: 158
  • 20200806_172540.jpg
    20200806_172540.jpg
    406.3 KB · Views: 165
  • 20200806_172558.jpg
    20200806_172558.jpg
    547.2 KB · Views: 171
  • 20200806_172603.jpg
    20200806_172603.jpg
    545.4 KB · Views: 182
  • 20200804_160017.jpg
    20200804_160017.jpg
    2.5 MB · Views: 168
Last edited:
OP
OP
Keyzie
Another couple of pic's.............driveshafts are finished and look really well...........stainless exhaust being fabricated..........it's proper taking shape........awaiting inlet manifold and Jenvey bits....all good.......
 

Attachments

  • awa.jpg
    awa.jpg
    3.2 MB · Views: 182
  • ex1.jpg
    ex1.jpg
    3.4 MB · Views: 189
  • ex2.jpg
    ex2.jpg
    2.9 MB · Views: 207
  • shj.jpg
    shj.jpg
    2.4 MB · Views: 189
OP
OP
Keyzie
Just received the inlet manifold from Steve Bogg of Bogg Bros Ltd looks real tidy...ordered some bits from Jenvey re ITB linkages etc & Gavin has fabricated a small blanking plate.
 

Attachments

  • trello1838838980684039794.jpg
    trello1838838980684039794.jpg
    2.7 MB · Views: 202
  • trello2246058763315158704.jpg
    trello2246058763315158704.jpg
    2.7 MB · Views: 179
  • trello2497682314170093282.jpg
    trello2497682314170093282.jpg
    2.4 MB · Views: 180
  • trello7706523177488531888.jpg
    trello7706523177488531888.jpg
    2.1 MB · Views: 175
OP
OP
Keyzie
Thank you for liking...............Shipping is not bad as I use Parcel Monkey (they buy empty space from Parcel Force) usually about 40% saving.
 
OP
OP
Keyzie
Managed to salvage the clutch pedal & cylinder off the donor, was a proper tight fit, and you how we all enjoy a tight fit!....it's coming together
 

Attachments

  • trello8701121820685740225.jpg
    trello8701121820685740225.jpg
    2.8 MB · Views: 194
  • trello8868809991781933239.jpg
    trello8868809991781933239.jpg
    3 MB · Views: 180
  • trello1155232449008690509.jpg
    trello1155232449008690509.jpg
    2.9 MB · Views: 185
OP
OP
Keyzie
Stainless Exhaust fabricated....rear box was salvaged from donor.........will be ordering few Jenvey bits for the itb's and then it's onto the ECU wiring etc
 

Attachments

  • trello5250087254948069790.jpg
    trello5250087254948069790.jpg
    2.4 MB · Views: 173
  • trello6234434576364286345.jpg
    trello6234434576364286345.jpg
    2.9 MB · Views: 164
  • trello6959115266776354327.jpg
    trello6959115266776354327.jpg
    2.4 MB · Views: 198
  • trello7202219636903721519.jpg
    trello7202219636903721519.jpg
    3.4 MB · Views: 179
  • trello8071045693555648996.jpg
    trello8071045693555648996.jpg
    2.8 MB · Views: 173
  • trello8776928089157682579.jpg
    trello8776928089157682579.jpg
    2.3 MB · Views: 199
  • trello9047788509893728753.jpg
    trello9047788509893728753.jpg
    2.6 MB · Views: 176
Top