near side drive shaft

[donthedec]

Hi all
What's the best place to buy a new drive shaft from and what make ..
There's,a few on ebay New,at £39.95
Don

 

[andy]

J&R on eBay, had shafts from them.

 

[Azzydot]

Am after both sides my self mines preface 1.3 if am right I think preface shafts are 40mm and 1.0 facelift is same, @frank


Sent from my iPhone using Tapatalk

 

[jk9194]

Am after both sides my self mines preface 1.3 if am right I think preface shafts are 40mm and 1.0 facelift is same, @frank


Sent from my iPhone using Tapatalk

Same here so I need to do double check with diameter. Can anyone verify for me please? Btw my micra is 1.3 prefacelift


Sent from my iPhone using Tapatalk

 

[Azzydot]

Same here so I need to do double check with diameter. Can anyone verify for me please? Btw my micra is 1.3 prefacelift


Sent from my iPhone using Tapatalk

easy would be checking how thick ur shafts are 40 or 38, if u have ur shafts on car u can check with calibrater tool. I don't have any shafts at on to work from that's why


Sent from my iPhone using Tapatalk

 

[frank]

Am after both sides my self mines preface 1.3 if am right I think preface shafts are 40mm and 1.0 facelift is same, @frank


Sent from my iPhone using Tapatalk

the gearbox spline is what you have to check azzy

 

[Azzydot]

the gearbox spline is what you have to check azzy

So it's spine patten or thickness am looking for ?


Sent from my iPhone using Tapatalk

 

[frank]

So it's spine patten or thickness am looking for ?


Sent from my iPhone using Tapatalk

both mate

 

[Azzydot]

both mate

can't I get the cv joints from motor factor with my full reg and then take full size and thickness from that


Sent from my iPhone using Tapatalk

 

[frank]

can't I get the cv joints from motor factor with my full reg and then take full size and thickness from that


Sent from my iPhone using Tapatalk

dunno mate, shafts are a bit of a minefield in terms of getting the right one

 

[Azzydot]

dunno mate, shafts are a bit of a minefield in terms of getting the right one

Remeber frank I only need the right hub size shafts not for the gearbox side lol


Sent from my iPhone using Tapatalk

 

[frank]

the hub splines are all the same azzy, but there are various different bare shaft splines and 2 different diff splines

 

[Azzydot]

the hub splines are all the same azzy, but there are various different bare shaft splines and 2 different diff splines

Can remember I used 27mm nut on both sides so if both cv fits my hubs I'll be ok ? It's cut and shut so need hub spines right


Sent from my iPhone using Tapatalk