Misc K11 parts for sale

With other things going on im selling the few bits i have here for the k11

cg13de in parts, bought for £200 delivered a year ago £50+ shipping, collection prefered

RX7 intercooler £40+ shipping
20120817_222040.jpg


sr16ve throttle £10+ shipping
20121105_111115.jpg


4efte aluminium intake manifold from glanza to make up mulholland style intake £20+ shipping
20121105_111135.jpg


20121105_111147.jpg


20120807_213456.jpg


pm or leave message here
 
OP
OP
Eire
it'll need the runners from the micra welded on, i think there are details on franks thread about how he modified the 4efe manifold to work
 
OP
OP
Eire
Bump

Surprised theres no interest in the intercooler, it fits nicely beside the rad on the crossmember and leaves the piping in a good place to do a short run of piping for the intercooler. Never been used and normally go for three times what im asking

20121110_154758.jpg


20121110_154732.jpg


20121110_154720.jpg



Sent from my GT-I9100 using Tapatalk 2
 
OP
OP
Eire
Bump

DET maf sold, rx7 IC sold

Have ga14 induction kit available which may interest some of you? Easily modded to fit the engine

Sent from my GT-I9100 using Tapatalk 2
 
OP
OP
Eire
Interested in the throttle body, what do you reckon it'll to take get it to fit?

It would probably be easier to draw a picture to show you but basically, an adapter plate. Use a rectangular plate with the CG bolt pattern to bolt the adapter to the manifold

Because the cg throttle bolt holes are tappered/offset, only the two widest bolts line up with the SR throttle. To bolt the throttle to the adapter you need to countersink two bolts and run them from the throttle underside and use nuts to tighten it to the adapter before bolting it down to the manifold.

Not sure if you follow that but id be more than happy to do up a sketch or a cardboard mock up to demonstrate what im trying to describe

Sent from my GT-I9100 using Tapatalk 2
 
Top