Prefer the black lip 
-
Please only use these forums for blogs, they are not a discussion forum
Mark's 1.0L
- Thread starter markbognor
- Start date
OP
OP
OP
OP
OP
OP
OP
OP
Wish I'd realised that the door wasn't shut properly, looks like I might have got the seat belt jammed when I jumped out for a few quick pics.
OP
OP
Here's a nicely taken (clearly not by me!) pic from a while back. It's from Simply Japanese at Beaulieu. Is that Kamarley?
The pic surfaced on https://www.facebook.com/JDM0fTheDay
The pic surfaced on https://www.facebook.com/JDM0fTheDay
OP
OP
Cheers Shaun.
OP
OP
OP
OP
OP
OP
One from last summer,
OP
OP
Sat nav said 18.9 sec quarter and 11.9 0-60 this morning. Only difference from stock is rolling radius.
Grabbed a pic of some of the first blossom of the year this morning too.
Grabbed a pic of some of the first blossom of the year this morning too.
mark i can't stop staring!!
b-e-a-utiful!!
b-e-a-utiful!!
OP
OP
Lol, it got a quick sponge down weekend before last, prior to that it was January!
It's this thing called photoshop?
OP
OP
Or you could use Gimp, which I believe is free. Shonkey and hamfisted use optional.
I've used gimp before but just prefer copies of photoshop from very reputable sources... It also seems to be pretty hamfisted with me too, coincidence?
OP
OP
I've got something arriving soon that I've wanted for ages. I'ts a bit of a gamble but if it pays off it will be quite excellent.
I'll no doubt take some pictures when it's here and fitted.
Here's a couple of recent pics. Back on the bare wellers at the mo because I'm running a single slot on the O/S rear, one of my tyres was doing a good impression of Kojak.
O/S spot "repaired" with baking foil.
I'll no doubt take some pictures when it's here and fitted.
Here's a couple of recent pics. Back on the bare wellers at the mo because I'm running a single slot on the O/S rear, one of my tyres was doing a good impression of Kojak.
O/S spot "repaired" with baking foil.
OP
OP
I have about this many horses.
OP
OP
The only time I can think of for definite would be the RR awards next Jan, that's if they hold them there, though it has become a bit of a tradition now.
OP
OP
Smartened up the wheels with some stainless bolts round the outside and some cheapy "D1 Spec" nuts. At least all the wheels are the same now, with a matching second set of nuts holding on the centres.
SirChris
Educated Bodger
Fair. Think I must go to the cafe for the wrong car events lol. Usually fairly nice cossie drivers. Never japs or duba
Sent from my Galaxy Nexus using Tapatalk
I went to ace cafe for a Japanese car meet many many moons ago but it was a bit of a shambles and there were a load of no-necks there illegally clamping peoples cars and demanding £'00s to let people go. Turned into a bit of a turf war so never bothered to go back.
I prefer professionally organised BBQ events in Reading
I prefer professionally organised BBQ events in Reading
SirChris
Educated Bodger
Professionally is not the wordI went to ace cafe for a Japanese car meet many many moons ago but it was a bit of a shambles and there were a load of no-necks there illegally clamping peoples cars and demanding £'00s to let people go. Turned into a bit of a turf war so never bothered to go back.
I prefer professionally organised BBQ events in Reading
I went to ace cafe for a Japanese car meet many many moons ago but it was a bit of a shambles and there were a load of no-necks there illegally clamping peoples cars and demanding £'00s to let people go. Turned into a bit of a turf war so never bothered to go back.
I prefer potentially organised BBQ events in Reading
right word.1000 points
OP
OP
OP
OP
Exciting stuff!
Just replaced the lighter with a twin usb power socket!
Yeah, I know it's wonky. I just couldn't get it to move once I'd shoved it in the original lighter hole.
Touched in round the rims too where a lot of white could be seen between the tyre and rim, so the wheels look smarter now too.
Just replaced the lighter with a twin usb power socket!
Yeah, I know it's wonky. I just couldn't get it to move once I'd shoved it in the original lighter hole.
Touched in round the rims too where a lot of white could be seen between the tyre and rim, so the wheels look smarter now too.
OP
OP
Went at the wheels with some gold paint a couple off days ago,
Which then went on to inspire an Advan livery themed photo shop. I don't know if I'll end up going that radical, but there'll be some more gold along the way somewhere, possibly just the diagonal stripe in vinyl, or maybe the roof.
Which then went on to inspire an Advan livery themed photo shop. I don't know if I'll end up going that radical, but there'll be some more gold along the way somewhere, possibly just the diagonal stripe in vinyl, or maybe the roof.
OP
OP
Finally got round to painting the wheels the other side, and added some vinyl.
Iirc correctly they are some wellers with laser cut designs bolted onto them? Could be mistaken....
Ah yes, I can just make that out in the photos, good call!
OP
OP
Who is Carl Austin?
Who is Carl Austin?
Carl Austin runs a company called Force Racing. He specialises in Mini parts but mostly he's famous for split rims. I had him make me a set of 13" billet split rims last year for the white K11 N/A track car.
OP
OP
Ahh, I know who you mean now, Carl popped up in "The fun you can have with a big lathe" showing off some of his wares.
This is the pic I tried to post further up:
Which fairly obviously becomes....
And a couple of non-facebook compressed pics, shonkey old phone cam anyway so they are probably no better than those up there.
Off side only, because I've still not got round to cutting the vinyl for the n/s yet!
This is the pic I tried to post further up:
Which fairly obviously becomes....
And a couple of non-facebook compressed pics, shonkey old phone cam anyway so they are probably no better than those up there.
Off side only, because I've still not got round to cutting the vinyl for the n/s yet!
OP
OP
