Home
Forums
New posts
Search forums
K10
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
K11
K11 General Discussion
K11 Micra Blogs
K11 Tuning & Mechanical
K11 Forced Induction tuning forum
K11 Bodywork & Interior
K11s in Motorsport
March Cabriolet (FHK11)
K12
K12 General Discussion
K12 Micra Blogs
K12 Tuning & Mechanical
K12 Bodywork & Interior
K13
K13 General Discussion
K13 Micra Blogs
K13 Tuning & Mechanical
K13 Bodywork & Interior
K14
K14 General Discussion
Stickers
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
Menu
Log in
Register
Install the app
Install
Home
K10
March Superturbo (EK10) Forum
March Super Turbo Auto to Manual Conversion
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Christopher Andrews" data-source="post: 796155" data-attributes="member: 15903"><p>Glad to hear you got an ST, it's unfortunate it came equipped with the AUTO. I don't think you're going to have much luck locating the factory EK10 manual box but I ran my ST using the K10 tranny from a Canadian Micra. The only risk that I can see is the March/Micra tranny was not designed for the output of the ST engine so it could grenade on you. </p><p></p><p>You will need the following for the conversion.</p><p></p><p>Transmission</p><p>Driveshafts</p><p>Rear Transmission mounts</p><p>Side Transmission mount</p><p>Shifter Linkage</p><p>Pedal box from a Manual</p><p>Clutch Cable</p><p>Clutch, </p><p>Flywheel</p><p>Reverse switch plug</p><p></p><p>The installation is pretty straight forward. The intercooler will lose all of the mounting points so it will be just floating around. If you come up with any other questions PM/DM me. I put an ST engine in my Figaro but I did the manual conversion before the engine swap.</p></blockquote><p></p>
[QUOTE="Christopher Andrews, post: 796155, member: 15903"] Glad to hear you got an ST, it's unfortunate it came equipped with the AUTO. I don't think you're going to have much luck locating the factory EK10 manual box but I ran my ST using the K10 tranny from a Canadian Micra. The only risk that I can see is the March/Micra tranny was not designed for the output of the ST engine so it could grenade on you. You will need the following for the conversion. Transmission Driveshafts Rear Transmission mounts Side Transmission mount Shifter Linkage Pedal box from a Manual Clutch Cable Clutch, Flywheel Reverse switch plug The installation is pretty straight forward. The intercooler will lose all of the mounting points so it will be just floating around. If you come up with any other questions PM/DM me. I put an ST engine in my Figaro but I did the manual conversion before the engine swap. [/QUOTE]
Verification
Post reply
Home
K10
March Superturbo (EK10) Forum
March Super Turbo Auto to Manual Conversion
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top
