k11 rear anti roll bar

[lee k0011]

After a cheap rear anti roll bar for my k11.

Needs to have all fixings to..

 

[frank]

is yours not factory fitted lee ?

 

[lee k0011]

is yours not factory fitted lee ?

No anti roll bars at all on mine.
So go'n to start with the rear as it will be the hardest to make fit..

 

[Enuo]

No anti roll bars at all on mine.
So go'n to start with the rear as it will be the hardest to make fit..

Really? Is that standard or were they pinched? Also is that just a march bootlid or is it a genuine march?

 

[lee k0011]

Really? Is that standard or were they pinched? Also is that just a march bootlid or is it a genuine march?

That is as it came out the factory as far as i no..

And it is a std boot lid that i made to look like a march one.

 

[frank]

No anti roll bars at all on mine.
So go'n to start with the rear as it will be the hardest to make fit..

the front should have the captive nuts in the floor lee, but my blue k11 had no brackets welded on the rear axle and the chassis rails had no mounts welded on for the droplinks

 

[lee k0011]

the front should have the captive nuts in the floor lee, but my blue k11 had no brackets welded on the rear axle and the chassis rails had no mounts welded on for the droplinks

Mine needs the mounts putting on for the rears. But i have seen a few f1000 micras that have done it.
All the brackets look very simple to fabricate and fit..