K11 CGA3DE-T powered "Hello From Greece - Hellas"

OP
OP
Jim-GR
finally some parts arrived....
i have painted my valve cup and now on we are reasseblying the enige in order to make the new engine loom for the Link G4

take a look from the valve cup...
3033_10151858607015016_1160096365_n.jpg





400958_10151858606805016_76060481_n.jpg
 
OP
OP
Jim-GR
Thanks guys for your good words....
This is aerography that a very good friend of mine did...
the base its the same color as the car and then painted a racing flag on it with aerography...
its much more beutifull in reality than the pictures...
now i plan to brushe some things at the engine bay to make them look shiny
and some pipes are gonna be black mat to be as bad as it can be...
i want everything to look great now...
is there anyone to now what kind of cable i want to relocate the battery at the trank?
any suggestions will be helpfull
 
OP
OP
Jim-GR
got my new throtlebody
i have made it bigger enough and done some honing inside it to have better flow from the incoming air.
Also took some special matterial for alluminium and closed all the original holes that had for the factory sensors that i dont use any more
PS:also done thiner the throtle helder so i can have as less as i can air resistance on it....
take a look

534530_10151875193185016_1606672447_n.jpg



525470_10151875193540016_1889188546_n.jpg



525475_10151875193430016_1146975784_n.jpg
 
OP
OP
Jim-GR
Lets make an update after so long
new exhaust manifold in order to turn over the turbo

935243_10152210359945016_2108831646_n.jpg


215230_10152210359965016_917683417_n.jpg


get a closer look at the soldering


943441_10152210382910016_526034721_n.jpg



here is fitted on engine just to be sure that everything is OK

943457_10152213471675016_212798807_n.jpg


and here is my new radiator that arrived this week

946798_440800956015532_1848097234_n.jpg


there is so much things to do...
unfortunatelly the greek crysis day by day make thing getting worse
so the project is still running but in a very slow way...
 

Stani1029

Club Member
What have you done with the old manifold? New one looks great! And crisis or not atleast you still have the car, slow progress is better than nothing :)
 
OP
OP
Jim-GR
What have you done with the old manifold? New one looks great! And crisis or not atleast you still have the car, slow progress is better than nothing :)

Thanks for your good words :) i still have the old one in great condition...
Yes you are right slow is better than nothing....and still have something to spent over time in order to take my mind away from everyday problems....
 
OP
OP
Jim-GR
What would ont of those turbo manifolds Costa? I Will need onekligen later!

i dont know yet the final cost....(today we decided to make it with external wastegate.....:D we will be a litle bit noisy...)
if you are interested i will give an ask to the guy is building it and tell you...
 
i dont know yet the final cost....(today we decided to make it with external wastegate.....:D we will be a litle bit noisy...)
if you are interested i will give an ask to the guy is building it and tell you...
Yes im verk intrested :) im ringt nog converting my k10 with a CG10DE to get The fuelinjection and electronics sorted out, then I will swap for a CGA3D, I'm not looking for as high power as yours tho, maybe 150 at the wheels to begin with :) what turbo would fit that manifold and be the right size to get as much low end torque as possible?
 
OP
OP
Jim-GR
Yes im verk intrested :) im ringt nog converting my k10 with a CG10DE to get The fuelinjection and electronics sorted out, then I will swap for a CGA3D, I'm not looking for as high power as yours tho, maybe 150 at the wheels to begin with :) what turbo would fit that manifold and be the right size to get as much low end torque as possible?



this kind of manifold can take any turbo that has t25 flange thats a big range of turbo's
in order to get low end torque it's not only matter of the turbo but most off the engine you gonna build...
you need to make good research with cams valves etc
i think that a medium range turbo its going to work great in order to get the ammount of power you want with low pressure
i was using a modified
GT2554R
and was really great for everyday car but it can produces as well good power at wheels...
 

Seb_

Give me some frogs.
Site Supporter
Always loved that topic, I was so glad when you finally decided to keep it. New manifold is a beauty! Go Jim !
 
this kind of manifold can take any turbo that has t25 flange thats a big range of turbo's
in order to get low end torque it's not only matter of the turbo but most off the engine you gonna build...
you need to make good research with cams valves etc
i think that a medium range turbo its going to work great in order to get the ammount of power you want with low pressure
i was using a modified
GT2554R
and was really great for everyday car but it can produces as well good power at wheels...
I think Saab aero turbos are t25?
Yeah I know, torque is more important in my build than peak power, I don't want to have to rev hard to get going hehe, it will be my everyday driver during summer and autumn, so drivability is key :) im thinking about ordering rods and pistons from fusion motorsport, what compression ratio should I aim for? I will use E85 fuel and a fuel pump for Volvo 940 turbo (brand new bosch of course) and that's good for at least 350hp on 95/98 octane.
 
OP
OP
Jim-GR
And we are moving on....

Today the guys that they are building me the exhaust system completed the down pipe
once again a WONDERFULL JOB 100% handmade
Next to complete is the external wastegate that arrived yesterday from TiAL
and all the undernith pipe job we hope soon to be completed and to go on with the electrical...
enjoy

994781_10152296870980016_478126643_n.jpg


7209_10152296871025016_1510077008_n.jpg


1012763_10152296871050016_1356583327_n.jpg


1014260_10152296871130016_1503481937_n.jpg


1002236_10152296871200016_323945242_n.jpg


1002417_10152296871285016_2030874864_n.jpg


1017253_10152296871350016_1904483592_n.jpg


7283_10152296871385016_1272161337_n.jpg


5862_10152296871510016_592480100_n.jpg


1011813_10152296871530016_1316468878_n.jpg


988645_10152296871750016_1635393920_n.jpg


1010262_10152296871830016_1856605214_n.jpg



PS : Plus some sneek peak from the turbo that is from HKS :D :D :D
 

Low Rider

Poindexter
Founding Member
Moderator
Club Member
This post makes me highly aware that I know very little about turbochargers...


I'm no egghead. I'm only aware of the units in question as they frequently come up in discussion amongst Skyline owners. There's always a risk it's a pile of tripe lol ;)

Still, regardless of numbers, its good to see Jim getting the car back towards being alive again :)
 
OP
OP
Jim-GR
A.K.A - Garrett GT2859R 707160-9

Nice! :D


Yep as i know...but this one is modified once more so we can be sure its going to work great with this "litle" in cubic motor...
Lets hope that what we have done is correct and its working because else we have just spent some uselles money...
hahahahahahahahahahahahahaha
 
OP
OP
Jim-GR
I'm no egghead. I'm only aware of the units in question as they frequently come up in discussion amongst Skyline owners. There's always a risk it's a pile of tripe lol ;)

Still, regardless of numbers, its good to see Jim getting the car back towards being alive again :)


thanks for your good words....
 
OP
OP
Jim-GR
Theese are pretty fresh stuff some hours ago....continuing with the rest of the exhaust......


1044479_10152310709575016_1767960079_n.jpg



1009732_10152310709845016_1519547107_n.jpg



994168_10152310709890016_1565514818_n.jpg



1002725_10152310710235016_6155248_n.jpg



1044931_10152310710385016_210739597_n.jpg



480122_10152310710430016_1945221468_n.jpg



969880_10152310710525016_523290173_n.jpg



1014297_10152310709595016_15683699_n.jpg



1000371_10152310710725016_1350970288_n.jpg



943515_10152310709630016_1903430843_n.jpg



600467_10152310710845016_142684737_n.jpg


Theese guys have done real GREAT WORK all of the pipes are soldered with tig and they look like charm...
we only have the external and we are moving on with the electrical...

PS : also some sneek peak too to my new adjustable panhrad rod from DAIYAMA
 
Panhard rod looks the business! Is it stainless? Exhaust looks sweet! What bore size? Glad this thing is progressing again!
Edit; its aluminium by the looks :)
 
OP
OP
Jim-GR
Panhard rod looks the business! Is it stainless? Exhaust looks sweet! What bore size? Glad this thing is progressing again!
Edit; its aluminium by the looks :)
yeap panhrad rod is stanless steell... with ball bearing at the conections of it...it is for race use only...but hoo gives a s h i t ...hahahahahahahahhahaha
the bore is 70mm to the pipes and 110mm at the end...
 
OP
OP
Jim-GR
Thanks a lot guys
all of you for your good words...
Iam afraid once again the project has to stop (and it is allready stopped...) ...dispite all my efforts i cant spent any more money
the things here are getting much more difficult than any other year before.
I love this car so much but the only thing i can do is to give some money to take licance plates back...if i dont do that this year
the car has to be deleted and then destroyed...thats the great democratic law here...
the last months barelly i was able to live with my salary and now it is reduced once again....i get only 340 euro the month...there is no way to build the car
from the beggining with this money...i dont know even if i can live with them...
I hope something to change as soon as posible...but iam not optimistic any more...
Chears...
Jim....
 
Top