• Please only use these forums for blogs, they are not a discussion forum

K10 First Car "Build"

G3 Cutting Compound should lift out all the light scratches. Hopefully it'll work well.
 

Attachments

  • 1458915234831.jpg
    1458915234831.jpg
    69.2 KB · Views: 476
Rust. Jesus. On the chassis on the offside trailing arm mount and under the rear seats. Outer sills aren't in the best of condition either. Starting to show her age I think.
 

Attachments

  • 1459528951070.jpg
    1459528951070.jpg
    47.2 KB · Views: 508
  • 1459528966919.jpg
    1459528966919.jpg
    63.7 KB · Views: 491
Quick paint test. Match is spot on. A bit blobby as I haven't got the steadiest hand. Just need practice I reckon.
 

Attachments

  • 1459530821748.jpg
    1459530821748.jpg
    34.1 KB · Views: 477
  • 1459530834611.jpg
    1459530834611.jpg
    35.3 KB · Views: 465
  • 1459530849333.jpg
    1459530849333.jpg
    24.9 KB · Views: 472
2 years ago today this car was bought. Almost to the hour. No doubt there will be many more to come, even though it's pissed me off more times than I can count to. Hopefully the difference from now to 21-04-2018 will be more drastic than 14' to 16'. Just looks like lows and wheels at the mo.

That's it really lol. No real update
 

Attachments

  • 1461253607429.jpg
    1461253607429.jpg
    128.6 KB · Views: 463
  • 1461253649226.jpg
    1461253649226.jpg
    70.6 KB · Views: 451
Think it's safe to say this blog has really slowed since I started driving. Its still plodding away with its poorly engine (awful misfire). Just about made it to the local Jap meet yesterday where it had its photo took :) One of my favourite photos I think.
 

Attachments

  • 1462393293770.jpg
    1462393293770.jpg
    36.3 KB · Views: 443
Hows that happened then? To much extension in the middle


Sent from my iPhone using Tapatalk
On the lip there's little "U" cutouts presumably for some sort of trim. I reckon they have made a weak point on the arch and allowed them to dent. Same thing in the exact same places has happened on the other side. Just a K10 thing I reckon. Gonna try to tap the dents back out.

Was well heated, rolled in stages with a proper tool. Mind you, was my first time rolling arches so that could have been one reason it happened.

Fortunately its not too bad. Can only really tell they aren't arch shaped from within about a meter of the arch.
 
(Terrible ordering I forgot about this) Bought an MA12 5spd with 47k on it to paint up and drop into the K10. Gearbox unfortunately is an S4 which I'm told is the weaker box.

Gonna be running my MA10 carb which should find a bit of power, will also change all of the belts, filters and check the timing before it all gets put in place of my pov spec 1.0 4spd. Can't wait till I've got a shiny engine bay.
 

Attachments

  • 1464021188433.jpg
    1464021188433.jpg
    62.8 KB · Views: 444
Is the S4 box a 5 speed? I don't think i'd worry about it being a weaker box.
Unless of course you like doing burnouts and crashing into other cars on a muddy oval.. :L
 
Is the S4 box a 5 speed? I don't think i'd worry about it being a weaker box.
Unless of course you like doing burnouts and crashing into other cars on a muddy oval.. :L
Yeh. They did an S4 and an S5. S5 being the stronger one. Mr. Beardmore went through 3 S4's. I'm not too worried to be honest
 
Routine wash got out of hand today. Ran over the paint with a claybar cloth, once again, and whacked some Autoglym on and some G3 here and there. Need to sort that scabby grille out :/
 

Attachments

  • 1464111642242.jpg
    1464111642242.jpg
    96 KB · Views: 404
Bish, bash, bosh. Grille has been sent to be painted which left with me with a badge and some spare time. Just need to paint between the gaps of the "S"s and "N"s with a small brush and put it back onto the grille. Turned out alright.
 

Attachments

  • 1465388843468.jpg
    1465388843468.jpg
    146.2 KB · Views: 426
  • 1465388859809.jpg
    1465388859809.jpg
    35.4 KB · Views: 448
Grille painted so it's no longer matte. The difference is minimal to be honest, kept me occupied for a while though.
 

Attachments

  • 1465930906597.jpg
    1465930906597.jpg
    51.2 KB · Views: 467
  • 1465930927564.jpg
    1465930927564.jpg
    60.4 KB · Views: 430
NOTE (Handling Coilover Setup):

- Front +2.5 dp
- Rear +6dp

Been travelling a lot lately to had to soften the suspension. Don't want to forget them figures.
 
Stripped the rear drums of their rotten backing plates and slapped a few coats of matte black on to make them look nice. Could really do with a bit of an overhaul but that's not a job for a rainy Friday afternoon.
 

Attachments

  • 1467392600421.jpg
    1467392600421.jpg
    64.4 KB · Views: 437
  • 1467392637466.jpg
    1467392637466.jpg
    72.1 KB · Views: 381
  • 1467392666928.jpg
    1467392666928.jpg
    51.2 KB · Views: 419
New strut brace for the rear :)

Would be installed on the car by now but, rotten turret. Project save a K10 from the scrapyard is underway now
 

Attachments

  • 1468263428757.jpg
    1468263428757.jpg
    79.3 KB · Views: 399
  • 1468263450823.jpg
    1468263450823.jpg
    37.3 KB · Views: 407
Made a start on the MA12 5spd I bought with the intent of cleaning it up. Haven't been updating as I went along, so here's a big lump. MA12 engine with 47,000 miles on it, approximately.
 

Attachments

  • 1472318657383.jpg
    1472318657383.jpg
    62.8 KB · Views: 415
Wire wheeled the gearbox down. Would love to have left it as bare metal and treated it as it looked awesome. But struggled to clean the engine up to the same standard so it had to be painted.
 

Attachments

  • 1472318794650.jpg
    1472318794650.jpg
    105 KB · Views: 372
  • 1472318813407.jpg
    1472318813407.jpg
    47.6 KB · Views: 415
Going for a standard looking style. Black sump, black pulleys, black rocker cover with a silver block and head, nice and simple. Everything has been wire wheeled before paint. Rocker cover done. Needs its gasket replacing, have one ready for installation when its due to be back on the engine.
 

Attachments

  • 1472318916546.jpg
    1472318916546.jpg
    28.9 KB · Views: 387
Engine is ready for paint (hasn't yet been done due to the weather). Took the opportunity while the sump and rocker cover was off to wipe away oil from the cam and crank to make sure I have a healthy engine, seems to look okay to me, from an untrained eye. No damage anyway so I'm happy
 

Attachments

  • 1472319038836.jpg
    1472319038836.jpg
    71.8 KB · Views: 407
  • 1472319060576.jpg
    1472319060576.jpg
    60.2 KB · Views: 441
  • 1472319078473.jpg
    1472319078473.jpg
    60.2 KB · Views: 412
Alternator mount, engine mount, gearbox mount, pulley cover, crank wheel and all small bits related to said components painted black. All the rest of the pulleys will be painted black when the engine paint is dry and safe to mask up. All bar the zinc wheel.
 

Attachments

  • 1472319193927.jpg
    1472319193927.jpg
    47.7 KB · Views: 387
  • 1472319214705.jpg
    1472319214705.jpg
    37.5 KB · Views: 370
Disgusting. Sump has had all the old gunk wiped out and will be wire wheeled and painted after I've painted the engine. Using it to cover the bottom end. All the sealant is off and some high temp sealant ready to bond the block and sump together
 

Attachments

  • 1472319401000.jpg
    1472319401000.jpg
    83.8 KB · Views: 390
Magnecor HT leads, Exedy 3 piece clutch, genuine rocker cover gasket and some form of non gen timing belt and tensioner. Also have new NGK spark plugs which aren't pictured and the engine currently in the K10 has a new rotor arm and dizzy cap. Needless to say it will run very smoothly. I hope.

As the engine stands it needs paint, sump needs paint, then everything putting back together and finally, dropping in :)
 

Attachments

  • 1472319566029.jpg
    1472319566029.jpg
    51 KB · Views: 379
  • 1472319586096.jpg
    1472319586096.jpg
    62.1 KB · Views: 418
Niiice, can't wait to see how the whole thing looks put together. Shame the Nissan logo on the valve cover is so flat, otherwise you could sand it back to bare metal to make it stand out, like I'm gonna do with my CG13 once I touch up the spots where paint peeled.
 
Great minds think alike Mike! That was the plan! Sand it back and polish. Did a trial run sanding it back before I wire wheeled it. It's very flat, couldnt manage it without catching the rest of it :( Its even flatter on the one in the car unfortunately. Nice idea though.

I've been flicking through your thread, it's a good read :)
 
Why did Nissan think this was a good idea. The rocker cover bolts, they don't even get tight. They just keep spinning. Me I like things tight, so as you might expect, I "overtightened" them. Even though they were still incredibly loose. So that's the rocker cover ruined. Will paint up the MA10 rocker cover once the 1.2 is in and put it on. What an annoying mishap
 

Attachments

  • 1475422377600.jpg
    1475422377600.jpg
    26.8 KB · Views: 396
K10 has gone for welding work with GPZ Automotive. Seized the opportunity to polish the wheels :)
 

Attachments

  • 1477049458701.jpg
    1477049458701.jpg
    45.8 KB · Views: 372
  • 1477049471537.jpg
    1477049471537.jpg
    70.4 KB · Views: 373
  • 1477049482299.jpg
    1477049482299.jpg
    75.4 KB · Views: 387
Oh. I forgot about this. Its all welded up, the sill needs a splash of filler to smooth out where it's been welded. The engine still needs dropping in, all that's left is to paint the sump. Its still getting cleaned often, polished often and spray waxed often. All is well in the Beardo corner.

a51f976cccfb525bb17937cdce0a5000.jpg
 
Back
Top