Home
Forums
New posts
Search forums
Model-by-Model
K10
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
K11
K11 General Discussion
K11 Micra Blogs
K11 Tuning & Mechanical
K11 Forced Induction tuning forum
K11 Bodywork & Interior
K11s in Motorsport
March Cabriolet (FHK11)
K12
K12 General Discussion
K12 Micra Blogs
K12 Tuning & Mechanical
K12 Bodywork & Interior
K13
K13 General Discussion
K13 Micra Blogs
K13 Tuning & Mechanical
K13 Bodywork & Interior
K14
K14 General Discussion
Stickers
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
K10
K10 General Discussion
K10 Micra Blogs
K10 Tuning & Mechanical
K10 Bodywork & Interior
March Superturbo (EK10) Forum
Nissan Pao (PK10) Forum
Nissan Figaro (FK10) Forum
Nissan BE-1 (BK10) Forum
K11
K11 General Discussion
K11 Micra Blogs
K11 Tuning & Mechanical
K11 Forced Induction tuning forum
K11 Bodywork & Interior
K11s in Motorsport
March Cabriolet (FHK11)
K12
K12 General Discussion
K12 Micra Blogs
K12 Tuning & Mechanical
K12 Bodywork & Interior
K13
K13 General Discussion
K13 Micra Blogs
K13 Tuning & Mechanical
K13 Bodywork & Interior
K14
K14 General Discussion
Menu
Log in
Register
Install the app
Install
Home
K11 Tuning & Mechanical
Injectors cut off
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="-WJ-" data-source="post: 793567" data-attributes="member: 41174"><p>Hi, you can fit an earlier non-nats ecu, swap around a few wires and you're done. Most of the people in this forum refer to Ed from fusion motorsports for a solution, but Ed his info is no longer online, his micra links on his website are dead and he doesn't respond to emails. I've spent some time trying to fix this exact same issue, and have fixed it 100%.</p><p></p><p>This fix is for the micra with the key with the red chip in it, and the non-coilpack engine with the single distributor.</p><p></p><p>Get an early ecu (the oblong one, not a square one) that fits your engine (either cg10 or cg13).</p><p></p><p>On the engine loom (so on the plug to the ecu) switch over these wires:</p><p>switch pin 106 to pin 104</p><p>switch pin 12 to pin 36</p><p>switch pin 31 to pin 22</p><p>switch pin 40 to pin 30</p><p></p><p>After this your car will not have an immobiliser anymore but you can still use your old keys.</p><p></p><p>you can send some thanks to <a href="https://www.paypal.com/paypalme/willemjacobdijkstra" target="_blank">https://www.paypal.com/paypalme/willemjacobdijkstra</a> => I've spent considerable time on this, but would like to share the knowledge (unlike some!)</p><p></p><p></p><p><img src="https://www.micra.org.uk/attachments/k11-nats-to-no-nats-conversion-png.74911/" alt="k11 nats to no-nats conversion.png" class="fr-fic fr-dii fr-draggable " style="" /></p><p></p><p></p><p>P.S.</p><p>If you have an australian car, you can just plug in a non-immobilised ecu and it will just work!</p></blockquote><p></p>
[QUOTE="-WJ-, post: 793567, member: 41174"] Hi, you can fit an earlier non-nats ecu, swap around a few wires and you're done. Most of the people in this forum refer to Ed from fusion motorsports for a solution, but Ed his info is no longer online, his micra links on his website are dead and he doesn't respond to emails. I've spent some time trying to fix this exact same issue, and have fixed it 100%. This fix is for the micra with the key with the red chip in it, and the non-coilpack engine with the single distributor. Get an early ecu (the oblong one, not a square one) that fits your engine (either cg10 or cg13). On the engine loom (so on the plug to the ecu) switch over these wires: switch pin 106 to pin 104 switch pin 12 to pin 36 switch pin 31 to pin 22 switch pin 40 to pin 30 After this your car will not have an immobiliser anymore but you can still use your old keys. you can send some thanks to [URL]https://www.paypal.com/paypalme/willemjacobdijkstra[/URL] => I've spent considerable time on this, but would like to share the knowledge (unlike some!) [IMG alt="k11 nats to no-nats conversion.png"]https://www.micra.org.uk/attachments/k11-nats-to-no-nats-conversion-png.74911/[/IMG] P.S. If you have an australian car, you can just plug in a non-immobilised ecu and it will just work! [/QUOTE]
Verification
Post reply
Home
K11 Tuning & Mechanical
Injectors cut off
Top