how fast is your car???

[micra-mad]

Found this try it see what you get!

http://www.letstorquebhp.com/calculator.asp

Power at Flywheel (BHP) : 74
Weight without Driver (KG) : 601
Power to Weight Ratio (BHP Per Ton) : 125.10
0 - 60 (Secs) : 12.48
0 - 100 (Secs) : 36.32
60 - 100 (Secs) : 17.83
Quarter Mile (Secs) : 22.45
Terminal Speed (MPH) : 80.39
Drag Strip Quarter Mile (Secs) : 16.81
Drag Strip Terminal Speed (MPH) : 81.78

 

[Alienfish360]

Unfortunately that's nothing more than a guess, especially without taking into account the torque figures.

 

[micra-mad]

i dont kwon i just put the bhp and the Weight and it came back with that so and it not 100%

 

[jim_bling]

Power at Flywheel (BHP) : 101
Weight without Driver (KG) : 600
Power to Weight Ratio (BHP Per Ton) : 171.04
0 - 60 (Secs) : 6.52
0 - 100 (Secs) : 18.08
60 - 100 (Secs) : 11.57
Quarter Mile (Secs) : 15.01
Terminal Speed (MPH) : 91.12
Drag Strip Quarter Mile (Secs) : 14.81
Drag Strip Terminal Speed (MPH) : 92.76

 

[Robb]

Methinks those are both a little generous, mainly because of the weight, 600 kgs would take a lot to achieve.

 

[jim_bling]

haha im not sure how much mine would weight mate so i just put down 600 as micra-mad put down 601 how much would mine weigh stripped out

 

[Alienfish360]

not a great deal less than standard, you're gonna need a turbo to get a K11 into the CG into the 14s

the standard k11 is just under 900kg, not including fuel.

There's no way that your interior weighs 250kg

You may have saved 5 or 6 I reckon.

 

[Paul Smith]

Power at Flywheel (BHP) : 128.
Weight without Driver (KG) : 750
Power to Weight Ratio (BHP Per Ton) : 173.41
0 - 60 (Secs) : 6.42
0 - 100 (Secs) : 17.35
60 - 100 (Secs) : 10.94
Quarter Mile (Secs) : 14.89
Terminal Speed (MPH) : 92.63
Drag Strip Quarter Mile (Secs) : 14.69
Drag Strip Terminal Speed (MPH) : 94.29


Bit of fun

 

[MicraFish]

I know the answer without doing the calculator thing - it's 'not very'!

 

[Ian]

Power at Flywheel (BHP) : 220Weight without Driver (KG) : 1300Power to Weight Ratio (BHP Per Ton) : 171.950 - 60 (Secs) : 6.250 - 100 (Secs) : 16.2460 - 100 (Secs) : 10.00Quarter Mile (Secs) : 14.63Terminal Speed (MPH) : 94.88Drag Strip Quarter Mile (Secs) : 14.53Drag Strip Terminal Speed (MPH) : 95.97
Seems about right.

 

[Ed]

Power at Flywheel (BHP) : 200Weight without Driver (KG) : 700Power to Weight Ratio (BHP Per Ton) : 290.300 - 60 (Secs) : 4.660 - 100 (Secs) : 11.4660 - 100 (Secs) : 6.80Quarter Mile (Secs) : 13.06Terminal Speed (MPH) : 106.73Drag Strip Quarter Mile (Secs) : 12.86Drag Strip Terminal Speed (MPH) : 108.75

 

[micra-mad]

haha im not sure how much mine would weight mate so i just put down 600 as micra-mad put down 601 how much would mine weigh stripped out

my mate said a micra weight around 600-650 so i just put 601 lol

 

[Low Rider]

Power at Flywheel (BHP) : 107
Weight without Driver (KG) : 855
Power to Weight Ratio (BHP Per Ton) : 127.16
0 - 60 (Secs) : 8.33
0 - 100 (Secs) : 24.89
60 - 100 (Secs) : 16.56
Quarter Mile (Secs) : 16.82
Terminal Speed (MPH) : 82.20
Drag Strip Quarter Mile (Secs) : 16.62
Drag Strip Terminal Speed (MPH) : 83.61

Considering I timed the car at 8.2sec 0-60 with a G-Tech and my last standing 1/4 at Pod was 16.801 with a nasty Almera clutch that wouldn't bite for love nor money in 1st, 2nd or 3rd!! That's not far off surprisingly :/

 

[Ceirwan]

A load of rubbish it vastly is optimistic with the 0-60's.
Apparently mine is 6.94... yeah right!

 

[daveeeeee]

Power at Flywheel (BHP) : 211
Weight without Driver (KG) : 1300
Power to Weight Ratio (BHP Per Ton) : 164.91
0 - 60 (Secs) : 5.98
0 - 100 (Secs) : 17.14
60 - 100 (Secs) : 11.16
Quarter Mile (Secs) : 14.77
Terminal Speed (MPH) : 92.81
Drag Strip Quarter Mile (Secs) : 14.37
Drag Strip Terminal Speed (MPH) : 95.65

 

[Tom 1.0]

it cant even calculate mine its so slow lol

 

[Stani1029]

yeah this is not close at all considering mines is more than 149bhp on the dyno, it just wasnt finished and the fact ive only had a 14.7 1/4 mile and im pretty sure the power to weight ratios are calculated wrong or is it just me??

Power at Flywheel (BHP) : 149
Weight without Driver (KG) : 720
Power to Weight Ratio (BHP Per Ton) : 210.27
0 - 60 (Secs) : 5.58
0 - 100 (Secs) : 14.47
60 - 100 (Secs) : 8.89
Quarter Mile (Secs) : 14.03
Terminal Speed (MPH) : 98.46
Drag Strip Quarter Mile (Secs) : 13.83
Drag Strip Terminal Speed (MPH) : 100.27

 

[BG101]

Erm .. 100 indicated, 96 on sat-nav fully laden with camping gear & food with myself & one passenger. Similar speeds with 2 passengers but probably less kit. Up to 105 indicated. CG10 with stock filter/exhaust etc. using regular 95 RON unleaded

Mind you, could have gone faster on a few occasions if there wasn't a lane-hog sat there parallel with vehicles in lane 2


BG

 

[joesouthgate]

my mate said a micra weight around 600-650 so i just put 601 lol

a k10 does. a prefacelift k11 weights 835kg standard.

 

[chipedwood]

Haynes Manual says 600kg for a 1.0 manual