High compression 1.3 running on 1.0L ecu

I'm running a 1.3 engine with the 1.0L pistons and ported head with std cams, have a 4 branch manifold and air filter aswell.

The question is will it run ok on a std 1.0L ecu I Know frank should be able to answer this no problem.
 

frank

Club Member
Did you need to adjust the fuel pressure at all frank??
the a/f/r,s should be unchanged by those mods i guess mate, mine came alive when i fitted the SR t/b and QG injectors (and a ghetto rising rate reg that lowered the fuel pressure to about 1.5 bar at low throttle), and that recorded 109hp and 15.49 1/4 mile :)
 
Same question frank 1l ECU be better for 4 branch - ga15 TB - ga16 black injectors - ga16 ghetto induction system... Or should I grab a FPR too?
 
thats a serioius releif...... i thought i was going to have to go find a 1.3L ignition barrel. ive got the ecu from my old one, but if i can leave my standard 1L ecu in place then happy days :D
 
Top