High comp cga3

[chickenwaahoo]

Hi all, after advice please.

Does anyone know if the comp height and pin dia is the same on cg10 and cga3 engines?

Need to get more compression in a rally cga3 engine and was thinking the easiest way is to get a set of +1mm cg10 pistons.

Any other suggestions?

Cheers.

 

[frank]

cga rods are the same length as cg13, so the pistons will protrude like so

 

[chickenwaahoo]

Cheers Frank,is that extra height taken up by the gasket or do the pistons need 'decking'.

 

[frank]

i ran that setup with 2 gaskets no probs mate