Help with Ogura TX07 supercharger

Hi,

I did see 2 for sale on ebay (Ogura TX12 & Ogura TX15) at the beginning of last and were around £800 to £1200. There really hard to come by unless someone is breaking a car.
The only thing I would say to you is service your supercharger every 10,000 miles as this will prolong the life of your supercharger and gives you time to source one as well.

I hope that helps
Thanks! I will keep looking in eBay.
 
TX12 is used for following charger kits:
Blitz for Altezza SXE10
Toms for GT86
Blitz for Toyota Hiace (now available new from Blitz)
Blitz for Toyota Land Cruiser Prado (now available new from Blitz)

Unfortunately, I can't find any used TX12 in Russia now, but recently they were on sale 1-2 times every year. Price for full Altezza kit is between 500 and 1100 USD. Good news - one is available in Tokyo https://page.auctions.yahoo.co.jp/jp/auction/n468785938
This is very helpful info, so I may still have chance to buy a new one in the future for spare parts.
 
Hi, is your car the 1.4? If so, you can get the inlet manifold and bits from a K12 Micra/E11 Note 1.4. I have had an Impul CR-01 kit fitted to my car last year. I got the kit from a guy who imports Cubes to the UK to sell. He has loads of Cube spares. FIrst Choice Imports, Dan Bell is his name. If you do need a replacement supercharger, they do come up now and then on JAUCE. He got me the full installation instructions, but in Japanese. Luckily, I have a Japanese neighbour who kindly translated the who pamphlet for me into English. The charger gives 35 bhp.
 
OP
OP
I
Hi, Yes mine is the 1.4 and I was kindly given my instructions with a supercharger which I purchased and was lucky enough to have it translated. I'm really glad that you told me that it's an extra 35bhp because I tried to find that out but never found the information. Also make sure that you service the supercharger after I think its 20,000km. What I have also noticed is that some of these superchargers have seen a lot of action in their does and if you do buy one make sure you get it serviced before you install it. Im trying to find a decent body specialist who can get my nissan cube impul back to a decent showroom finish. But it is difficult as a lot of the body repair places don't want to touch imported cars with body kits as they feel that once they remove a side skirt, front bumper etc they might damage it and that would be a greater problem
 
Hi,
I am from malaysia,
I have done replacing bearing and oilseal for few unit tx07 tx10..
Feel free to search my name in fb i have set some photo for public view
 
Top