Help please !

hi Folks

I am new here so hope this is in the right area for help !

I have just replaced the passenger side headlight bulb on our K12 and I removed the aim adjustment motor to make a bit more space.

Now that I have replaced the motor though, the headlight is now pointing too low and I think it is because the male part of the adjustment motor is not fitting into the back of the headlamp properly.
If I use the headlamp height adjuster switch in the car, the driver's side light moves up & down quite a bit but the passenger side only moves a fraction...

Any ideas how I can get it to aim properly again anybody ??

Here's hoping

thanks
 
I am replying to my own question :p

Went to the garage and they fixed it in 15 mins including doing the MOT headlight alignment test, total cost £12
The actual male part of ther adjustment motor has to be inserted at an angle so it connects with the back of the headlight from underneath
Hope this helps someone else if they find themselves in the same boat !
 
Back
Top