Heater panel bulb holder

Hi everyone!

I tried installing LEDs for the heater panel and whilst I was fitting one of them in, the bulb holder on the left popped inside the unit. Is there any way of putting it back in place?

rsz_img_20180324_150228462_hdr.jpg
 
Last edited:
I think youll have to pop the plastic centre console off (4 screws) and take out the 4 screws holding heater controlpanel in, then you can twist the panel and get behind to the bulb holders. They are twist fit, but its difficult to get fingers in. I fitted a blue T10 LED in mine (circled in red in second photo) a few days ago, but only had 1. Got to get another and fit it. I think access to that bulb is from the other side of the unit, hoping i can twist it enough to get around to that bulb holder. Both bulbs have been blown since i got the car 2 years ago 🤣🤣.
Screenshot_20230529_171045_Photos.jpg
20230528_153927_1.jpg
 
Put 2 blue T10 LEDs in the heater control panel and blue T5 LEDs in the speedo. Looks a lot better than normal bulbs in speedo and never had any lights in heater as both bulbs were blown before i got the car.
Screenshot_20230602_013439_Photos.jpg
Screenshot_20230602_005858_Photos.jpg
20230602_004238.jpg
 
Last edited:
Top