Ga16 Injectors

[Joanne]

Sold as seen, were in full working order when removed from my car last year. Direct replacement for the standard injectors.

I replaced them with Nismo 555cc injectors in a custom fuel rail when RC fitted the PowerFC.

£40 plus postage

**Advertised Elsewhere**

 

[Lou]

im interrteste jo, whats the difference

 

[K11_Dave]

Would these be suitable for a 1.0l or just the 1.3?

 

[Joanne]

RE: RE: Ga16 Injectors

im interrteste jo, whats the difference

The flow rate is 235cc/min and ideally you'd need an SAFCII or Dastek, or maybe somebody else can advise otherwise?

 

[Joanne]

RE: RE: Ga16 Injectors

Would these be suitable for a 1.0l or just the 1.3?

I'd say just for the 1.3.

 

[Ian]

Don't put on any CG series engine without a remap or even with a basic fuel ratio computer. You WILL overfuel and lose power.

 

[Ed]

These injectors are actually 198cc.

 

[Antony]

could you use these on a turbo conversion without too much mapping?

 

[Ed]

this thread is over a year old!! and no you cannot just change them without something to correct with.

 

[Titch]

Thread from the Dead!!