FOR SALE

OP
OP
Scopez
Hi all I have numerous parts available so please PM me for details. If there is enough interest i will break the car in parts otherwise sell as a whole.

Parts
Whiteline front & rear roll bars
Whiteline panhard rod
BC coilovers
Short shifter
Rear disc brake axel
Pulsar brakes
Rear March LED lights
Projector/HID front headlights
Tinted windows, rear quarters which open
Evo3 fox wheels with toyo t1rs
2.5 inch cat back system made by power flow
Boost guage, oil pressure, oil temp & innovative Wideband sensor
Gizmo boost controller
Walbro fuel pump
GA16DET Rebuilt with low comp vitara pistons
1.3 gearbox
Custom drive shafts
Stage 3 XTD 1.6 clutch
Lightened flywheel
Helix 3 paddle clutch with uprated pressure plate & bearing
Nismo Fuel pressure regulator
370cc injectors
Tsi turbo manifold
Intercooler
TD04HL 15T Turbo
Mocal oil cooler

This is of the top of my head im sure theres a few things iv missed. I forget lol, its been so long. Would be great project to finish if i dont find the interest to sell parts. Currently running 200 bhp, was due to be remapped with stronger spring/actuator but never got round to it. Easily capable of more power. Feel free to message for more details etc. Thanks
 
OP
OP
Scopez
e36830d831205abfc258d073e23536d1_uploadfromtaptalk.jpg
 
Hi all I have numerous parts available so please PM me for details. If there is enough interest i will break the car in parts otherwise sell as a whole.

Parts
Whiteline front & rear roll bars
Whiteline panhard rod
BC coil overs
Short shifter
Rear disc brake axel
Pulsar brakes
Rear March LED lights
Projector/HID front headlights
Tinted windows, rear quarters which open
Evo3 fox wheels with toyo t1rs
2.5 inch cat back system made by power flow
Boost guage, oil pressure, oil temp & innovative Wideband sensor
Gizmo boost controller
Walbro fuel pump
GA16DET Rebuilt with low comp vitara pistons
1.3 gearbox
Custom drive shafts
Stage 3 XTD 1.6 clutch
Lightened flywheel
Helix 3 paddle clutch with uprated pressure plate & bearing
Nismo Fuel pressure regulator
370cc injectors
Tsi turbo manifold
Intercooler
TD04HL 15T Turbo
Mocal oil cooler

This is of the top of my head im sure theres a few things iv missed. I forget lol, its been so long. Would be great project to finish if i dont find the interest to sell parts. Currently running 200 bhp, was due to be remapped with stronger spring/actuator but never got round to it. Easily capable of more power. Feel free to message for more details etc. Thanks

My friend !

How much for the above ?

Rear March LED lights
Whiteline front & rear roll bars
BC coil overs
 
OP
OP
Scopez
Since your running the standard box, what has be done to uprate the driveshafts?
Drive shafts are custom for where the engine sits in the bay. Longer one is for micra kit car & shorter custom made. Had no issues with breaking if thats what you mean
 

Low Rider

Poindexter
Founding Member
Moderator
Club Member
Eh up Triston......long time no see!

The fact it's setup on Nistune is a major thing to list...

To any interested parties, this is a very nicely put together car and it's got a butt load of torque being a GA16DE. I remember this when it was on a t25 Saab unit running about 6psi.

Sorry to see you selling up but I hope this goes as a complete car...
 
OP
OP
Scopez
Relist of car specs/parts

200bhp
GA16DE rebuilt with vitara pistons and arp rod bolts giving a compression of 8:1 iirc
Nissan sentra 1.6 fuel rail
370cc injectors
Nismo fpr
XTD Stage 3 1.6 clutch
Lightened flywheel
Cg13 gearbox
Custom drive shafts
S14 Afm
Pulsar ECU remapped by fusion
Sentra distributor
Tsi turbo manifold
TD04HL15T from saab aero
Fox evo3wheels with toyo t1rs
Rear disc brake axel
Pulsar brakes
Led march rear lights
Hid projector headlights
Gizmo boost controller
Lc1 Wideband
Boost, oil temp, oil pressure guages
Short shifter
Walbro fuel pump
Uprate ht leads
Front mount Intercooler & piping
Mocal oil cooler kit
Silicone hoses
Modified aluminium radiator to fit
Whiteline front & rear roll bars
Whiteline strut brace & Panhard rod
Bc coilovers
Baileys BOV
Smoked side repeaters
Tinted glass all round
Decat
Cat back exhaust system
Immobiliser/alarm turbo timer
JWT S1 Turbo cams

I also have for sale 1.3 Helix 3 paddle clutch with uprated pressure plate & bearing if anyones interested. £120
 
OP
OP
Scopez
Just remembered I have a JDM dash compartment/cup holder To fit K11 pre facelift

Good condition, has some minor marks. Nothing a little sand and respray can't fix. £45, pm if your interested.

Thanks
 
Very Interested in the white line front antiroll bar? PM me a price?


'94 k11 dot 1.0
McGill Motorsport steering wheel
Mountney steering wheel boss kit
Poorly fitted aftermarket backbox (3 inch rolled tip)
Lowered on Kilen springs
 

Andy_S

I Love Booooooost!
Club Member
Hi how much for the led rear lights and the front headlights?


Sent from my iPhone using Tapatalk
 
Top