***Custom door cards, JDM dash tray, K11 1.0L modified plus extras****

jimmy

Ex. Club Member
well as ive just bought a mk3 vr6 i need to get rid of the micra, so here it is plus some bits and pieces

-1995 K11 1.0L
- service history up to 80,000 (after this my brother serviced it)
-12 months
-6 months tax
-92000
-Lots of various reciepts for parts over the years
-Fully color coded (doors,mirrors,boot plynth,etc)
-rubbing strips removed
-V.Rare postert front bumper
-Super S rear bumper
-Aftermarket 52mm rev counter (smoked when ignitions off)
-15" black team dynamics with 195/50/15 firehawk tz200 with good tread all round
- 3 inch backbox by d and g performance
- passenger side door welded and fibreglassed, just needs smoothing and painting
- Chrome short shifter
- Sparco pedals
- Lowered 35mm
- Rover side skirts (like raceworks old car)
- Fog lights up front
- Clear side repeaters
- Fully sound deadened (doors, boot, rear quarters etc)
- Red and black floor mats
- 2000 model Gx rear spoiler

£1000

Front
http://img.photobucket.com/albums/v311/6453/100_0659.jpg
http://img.photobucket.com/albums/v311/6453/100_0655.jpg

Rear
http://img.photobucket.com/albums/v311/6453/100_0657.jpg
http://img.photobucket.com/albums/v311/6453/100_0656.jpg

Side
http://img.photobucket.com/albums/v311/6453/100_0667.jpg
http://img.photobucket.com/albums/v311/6453/100_0668.jpg
http://img.photobucket.com/albums/v311/6453/100_0670.jpg

Wheels
http://img.photobucket.com/albums/v311/6453/100_0658.jpg

pedals and floor
http://img.photobucket.com/albums/v311/6453/100_0664.jpg


I also have some parts for sale that i took off the micra

**First up is the custom door cards that won me best modification at JAE last year**

http://img.photobucket.com/albums/v311/6453/100_0671.jpg
http://img.photobucket.com/albums/v311/6453/100_0672.jpg
http://img.photobucket.com/albums/v311/6453/100_0673.jpg

in very good condition, do not come with the pioneer speakers but do come with the rockford fosgate tweeters which were 100 quid alone. These use the orignal micra door card mounts so are plug and play and enable bigger speakers to be fitted without modification the door.

£100 ono


***MPH steering wheel***

320mm that was 75 quid new it also includes the boss ( this alone was 30 quid)

http://img.photobucket.com/albums/v311/6453/100_0661.jpg

£60


***Set of red and black reclining bucket seats ***

very good condition and no marks where visible however on the very underneath of one of them there are few very very small holes (like 1mm) where it was tack welded in position to the subframe. One of them has a subframe attached so its just bolt on but the other will need one side of the seat subframe attaching to the micra one

http://img.photobucket.com/albums/v311/6453/100_0674.jpg

£50


***Set of 3 point raceland black harnesses E marked of course, Great condition with no tears etc and look brand new***

http://img.photobucket.com/albums/v311/6453/100_0675.jpg

£50


***gauge holders for passenger sides, carbon look, brand new in box***

£7

http://img.photobucket.com/albums/v311/6453/100_0653.jpg
http://img.photobucket.com/albums/v311/6453/100_0654.jpg



***HKS yellow mushroom filter, bit dirty so could do with a clean***

£10


***Ripspeed cam cover breather filter, great if you have replaced the factory air filter and need something to stop oil getting out whilst still venting pressure***

£5


*** Number plate gold with black lettering which says 'MICRA' (never used and still in the box) ***

http://img.photobucket.com/albums/v311/6453/100_0677.jpg

£20
 

Antony

Ex. Club Member
were you there when i picked my stuff up?...... if so... sorry bout missing my cup of tea, but i realy did need to get going, (was in bolton for 6 hrs..GRRR)

im interested in the throttle bodies......
how much and what dya rekon ill need to fit them (other than the inlet manifold., can i replace the injectors with the micra ones and run the e-manage???)
thanks
 
OP
OP
J

jimmy

Ex. Club Member
as i say one of the buckets is already mounted on the micra frame so you will just need to mount the other one. The one that isnt mounted is half done as well so the work is minimal.

The throttle bodies im after about 100 quid, you will obvious need an inlet manifold, ecu and probably a few extra sensors but to be honest im the wrong person to ask. I think the injectors can flow quite a substantial amount of fuel so i dont think they will need changing but you will have to double check that. Yeah i was the one making the tea lol but dont worry i wont hold it against you.

Okay the dash tray goes to nex.
 
OP
OP
J

jimmy

Ex. Club Member
obviously its not a direct bolt on but it will you will be able to make it fit just like any other aftermarket throttle bodies. As explained earlier you will need a inlet manifold and some sort of management system but like i said im the wrong person to ask about it.

bumpety bump
 
OP
OP
J

jimmy

Ex. Club Member
yeah thats 15 quid for all the arches

delivery will be more like a tenner becuase of the size of them

pm me if your interested
 
Top