• Please only use these forums for blogs, they are not a discussion forum

Curtis' micra k10

curtis

Ex. Club Member
MY k10 LS twin Weber beast! --> go to page 4!

This Blog contains all 4 of my Nissan Micra K10s that i have owned!

Nissan Micra K10 LS red Below

Nissan Micra K10 Super Black

Nissan Micra K10 GS white 1.2

And what i am currently on:

Probably one of the quickest k10s in the country

Nissan Micra K10 LS white on twin webers and a 1.2 uprated engine :)

Go To page 4 onwards for the updated micra, but have a read through my others if you wish :)

Top end rebuilt with new valves etc, new headgasket, and CBR600 bike carbs

Thanks Curtis
 

Attachments

  • DSC00160.JPG
    DSC00160.JPG
    627.1 KB · Views: 1,741
  • DSC00162.JPG
    DSC00162.JPG
    696.1 KB · Views: 668
  • DSC00024.JPG
    DSC00024.JPG
    665.1 KB · Views: 641
  • DSC00025.JPG
    DSC00025.JPG
    716.1 KB · Views: 611
  • DSC00026.JPG
    DSC00026.JPG
    676.9 KB · Views: 599
  • DSC00028.JPG
    DSC00028.JPG
    799.5 KB · Views: 644
  • DSC00068.JPG
    DSC00068.JPG
    636 KB · Views: 636
  • DSC00070.JPG
    DSC00070.JPG
    451 KB · Views: 640
  • DSC00027.JPG
    DSC00027.JPG
    649 KB · Views: 604
  • DSC00043.JPG
    DSC00043.JPG
    515.1 KB · Views: 574
  • DSC00741.JPG
    DSC00741.JPG
    417.9 KB · Views: 615
  • My car blacked sig.JPG
    My car blacked sig.JPG
    40 KB · Views: 546
OP
OP
curtis

curtis

Ex. Club Member
What do you think to this spoiler??

Its only stuck on at the mo, but when painted and put on properly, will it be a good thing?

thanks

Curtis:k10:
 

Attachments

  • DSC00040.JPG
    DSC00040.JPG
    641.2 KB · Views: 855

Courior

Fat ppl r harder 2 kidnap
Bit chavvy... I have a Super S Spoiler in V good cond all painted red and everything for sale.. make me an offer!!
 
OP
OP
curtis

curtis

Ex. Club Member
thats what i thought at first, but then again i want that bodykit that "batch" is selling so i think it might go well with that!

How much you after??:p
 
OP
OP
curtis

curtis

Ex. Club Member
ok i'll have a think! i'll get back to you soon.

Anyways update time!!

Down below:

Clutch in a very bad state!! 136000miles ent bad though!
My bucket seats, but i want super s ones!!
Parts of the engine that have been cleaned and ready for a reassembly!!

:k10:
 

Attachments

  • DSC00043.JPG
    DSC00043.JPG
    627.6 KB · Views: 549
  • DSC00044.JPG
    DSC00044.JPG
    432.4 KB · Views: 556
  • DSC00045.JPG
    DSC00045.JPG
    466.4 KB · Views: 554
  • DSC00046.JPG
    DSC00046.JPG
    672 KB · Views: 496
  • DSC00047.JPG
    DSC00047.JPG
    652.6 KB · Views: 590
  • DSC00048.JPG
    DSC00048.JPG
    636.4 KB · Views: 517
  • DSC00049.JPG
    DSC00049.JPG
    658.6 KB · Views: 578
  • DSC00050.JPG
    DSC00050.JPG
    425.2 KB · Views: 500

Speedle

Ex. Club Member
he he last time i changed the clutch on my first k10 it was down to the rivets mate so that one's in good condition in comparison :p

you should have the cam re-profiled while its out of the car ;)
 
OP
OP
curtis

curtis

Ex. Club Member
will do, and this car will be up for sale soon as i've re-built it as i've got a new car!!

Nissan micra s 1992 black
 

Micra 110

Site Supporter
Needs washing! LOL!

Was it easy planting those speakers in the door?
I've got some to go in sometime. It's the hole making i'm scared of! lol
 
OP
OP
curtis

curtis

Ex. Club Member
Was it easy planting those speakers in the door?
I've got some to go in sometime. It's the hole making i'm scared of! lol


Well in the LS, the holes are already templated out in the card!! if not the hole in the metal door frame is a good template!
 
OP
OP
curtis

curtis

Ex. Club Member
Here is an update!

This is my second micra!!

Nissan Micra K10 Super
Metallic Black
66,000 miles
Nissan 14" alloys
super s interior
sound system

More Mods on the way!! :)
 

Attachments

  • DSC00077.JPG
    DSC00077.JPG
    638 KB · Views: 565
  • DSC00078.JPG
    DSC00078.JPG
    630.2 KB · Views: 525
  • DSC00076.JPG
    DSC00076.JPG
    444 KB · Views: 450
  • DSC00073.JPG
    DSC00073.JPG
    388.7 KB · Views: 463
  • DSC00072.JPG
    DSC00072.JPG
    395.7 KB · Views: 468
  • DSC00070.JPG
    DSC00070.JPG
    433.2 KB · Views: 522
  • DSC00069.JPG
    DSC00069.JPG
    493.1 KB · Views: 565
  • DSC00068.JPG
    DSC00068.JPG
    457.3 KB · Views: 513
  • DSC00071.JPG
    DSC00071.JPG
    452.3 KB · Views: 510

Speedle

Ex. Club Member
thats cracking mate! is that the one that was for sale on here the other day? wheels look great on that really smart!
 
OP
OP
curtis

curtis

Ex. Club Member
dont remind me took me and my mate paul 3 days to get my black super s to be shiney! never again!!!!!!!

But the car does look good!!:p

then again i do like my red micra!:)

I'm selling either those alloys on the black micra 14" low profiles, Nissan Wheels

Or the 13" alloys on the red micra, not too sure which ones yet?!? :upside:
 
OP
OP
curtis

curtis

Ex. Club Member
Ok its update time on what modds i'm doing next, so here goes:

Lower by 35mm+
Tint all windows, should look good with bloack tints, as car is black
Exhaust
colour code front bumper
re-spray rear bumper
tint rear lights

Would love to get some more out of the MA10 but i can't think what to do to it:

Weber?
Inlet manifold?
 
OP
OP
curtis

curtis

Ex. Club Member
updated pics....

alloys still for sale only £100 delivered!!

PM me for details or see other thread in buy and sell!
 

Attachments

  • DSC00224.JPG
    DSC00224.JPG
    871.7 KB · Views: 414
  • DSC00229.JPG
    DSC00229.JPG
    901.2 KB · Views: 415
  • DSC00228.JPG
    DSC00228.JPG
    834.7 KB · Views: 446
  • DSC00227.JPG
    DSC00227.JPG
    782 KB · Views: 500
  • DSC00226.JPG
    DSC00226.JPG
    872.4 KB · Views: 481
  • DSC00225.JPG
    DSC00225.JPG
    811.3 KB · Views: 512
  • DSC00222.JPG
    DSC00222.JPG
    794.7 KB · Views: 432
  • DSC00221.JPG
    DSC00221.JPG
    822.9 KB · Views: 461
  • DSC00220.JPG
    DSC00220.JPG
    837.8 KB · Views: 485
  • DSC00219.JPG
    DSC00219.JPG
    770.7 KB · Views: 499
  • DSC00230.JPG
    DSC00230.JPG
    868.6 KB · Views: 484
  • DSC002282.JPG
    DSC002282.JPG
    839.9 KB · Views: 440
  • DSC002227.JPG
    DSC002227.JPG
    875.9 KB · Views: 447
  • DSC002223.JPG
    DSC002223.JPG
    817.8 KB · Views: 452
  • DSC00239.JPG
    DSC00239.JPG
    679 KB · Views: 438
  • DSC00238.JPG
    DSC00238.JPG
    663.4 KB · Views: 416
  • DSC00237.JPG
    DSC00237.JPG
    740.5 KB · Views: 417
  • DSC00236.JPG
    DSC00236.JPG
    804.3 KB · Views: 443
  • DSC00235.JPG
    DSC00235.JPG
    804.3 KB · Views: 454
  • DSC00233.JPG
    DSC00233.JPG
    733.4 KB · Views: 417

Micra 110

Site Supporter
For a minute there i was like..... eh? what happened to the red car?...

Back up to date now! :) lol!

...those seats look comfy...VERY comfy :)

Blacked out windows....mmm, very mafioso....:suspect:
 
OP
OP
curtis

curtis

Ex. Club Member
yeh should be good!!

oh and i just got some Vibe Slick 6x9's, to match the vibe slick 5.25" speakers i have in the front!!
 
OP
OP
curtis

curtis

Ex. Club Member
not to sure whether im putting on the side skirts and arch covers, i quite like it as it is, just need a front foah bumper.

yeh i like the interior in these cars! need to repair a tear in the driver seat though....

Heres a quicky,

Can i change the driver seat over for the passanger one? its just that the driver seat seems to have worn a bit and isn't as soft, a straight swap would be good.
 

Arnold

www.alanarnold.co.uk
Moderator
Site Supporter
I tried to do that and it wasn't easy! underneath, it's all hooked in rather securely. Found it easier finding another set of super s seats and swapping them over lol.
 
OP
OP
curtis

curtis

Ex. Club Member
haha nice one, but i did recently nearly get the passanger seat covers off......good idea speedle!! thanks ;)
 

Speedle

Ex. Club Member
stick some mr2 seats in mate, some for sale on here somewhere i'm sure, would get them myself if a had the cash spare.

indeed they are just the job!
DSC00462.jpg


nice to have the same seats in both my cars :D

put the rest to the super s kit on though mate looks like its got bits missing otherwise the super s skirts look great too helps complete the look of the side profile of the car ;) as you can see on my old super s!

03122005002.jpg
 
OP
OP
curtis

curtis

Ex. Club Member
eh i think i will stick the kit on with tape first to see how it looks.....

what do you use on the side skirts to hold them on?? screws or tape? (don't really want to go drilling holes in ma sills)
 
OP
OP
curtis

curtis

Ex. Club Member
Side repeaters

Thought id put them on as they were a freebee.....

cut them down a bit.....

double sided tape....

and then wallah!!
 

Attachments

  • DSC00020.JPG
    DSC00020.JPG
    791.6 KB · Views: 364
  • DSC00018.JPG
    DSC00018.JPG
    779.8 KB · Views: 395
  • DSC00016.JPG
    DSC00016.JPG
    794.2 KB · Views: 403
  • DSC00013.JPG
    DSC00013.JPG
    823.9 KB · Views: 452
  • DSC00012.JPG
    DSC00012.JPG
    832.4 KB · Views: 381
Hia Curtis,

Your pictures in this thread are brill mate!!

blown away by your stripdown to the journals!!! ...lol
(furthest I have gone is changing the transmission and that was bad enough...lol)

I fg LOVE black K10s even if they have faded to brownie red (like mine)lol


..keep it up!
 
OP
OP
curtis

curtis

Ex. Club Member
Super s Kit fitting Question..........

Has anyone just stuck the side skirts on? or do they have to be drilled.....not really wanting to go drilling holes in the sills....lol
 

Speedle

Ex. Club Member
you should drill the holes in the sills then use plastic lugs in the holes for the screws to go into, as long as you treat the holes you drill with some rust prevention stuff you wont have any problems ;)
 

Speedle

Ex. Club Member
thats how nissan fit them as standard, my super s didnt have one spot of rust near the holes after 14 years of being on the roads, and my super s was not well cared for (until i got it)
 
Top