Center Bore compatability?

Firstly, sorry if this is duplicating something that has been done before - but a search didn't throw anything this specific up.

I'm trying to compile a list of vehicles that have direct fit wheels to the k11, and so far have only come up with the following:

Nissan
100NX, Almera, Micra, Sunny 4 x 100 35...42 59.0

Renault
Clio, Megane, Laguna, R19, R21, Espace 4 x 100 35...38 60.0

Obviously the renault wheels could ideally do with spigot rings, but I'm fairly certain you can't get them in 1mm thickness.

I've heard of people referring to mx5 wheels as direct fit, but the center bore is smaller than the micra's from what I've read, can anyone shed any light on this?
 
Obviously the renault wheels could ideally do with spigot rings, but I'm fairly certain you can't get them in 1mm thickness.

To convert from 59.1 mm to 60.1 mm you would need a spigot ring which is 0.5mm thick, giving a total increase in diameter of 1mm. As you say, not practical really :(
 
Back
Top