Can I put Sunny ga14 clutch on my 1.3 micra?

[r3aktor.mk]

My clutch is gone, its stuck in neutral(lucky me),
there is a grinding noise when i press the pedal, when the engine is off, i can shift any gear except reverse.
When its on, i cant shift at all.

I have to wait for 2 weeks for clutch kit to arrive

AISIN - 200euros or
VALEO- 70euros.

There is VALEO clutch from Nissan Sunny available, but is it compatible for CG13?

http://nissan4u.com/parts/sunny/el_n14/1993_3/type_52/power_train/clutch/

Any clearances issues, etc?

K11 1993 1.3

Thanks in advance

 

[skymera]

As far as I know, they're different.

 

[Enuo]

I thought it was a 200mm clutch and so would not fit as you would need an almera fw, which would require an almera gearbox and starter motor I think

 

[frank]

if its 180mm, the friction plate should fit ok eh

 

[r3aktor.mk]

Well, this confuses me

Nipparts Clutch Kit Nissan MICRA (K11) 1.3 i 16V 92-03

• • Description: 3Pc Clutch Kit With Bearing

• • Diameter [Mm]: 180

• • Diameter 1 [Mm]: 180

• • Diameter 2 [Mm]: 180

• • Extra Information: Kit 3 Pieces (Cover & Plate & Bearing)

• • Hub Profile: 18X18X20,5

• • Number Of Teeth: 18

• Plate Diameter(Mm): 180

Car: Nissan SUNNY Mk III (N14) 1.4 i, 1392 cc, 75 hp
From: 10/1990 To: 05/1995

Number of Teeth 18
Outer Diameter [mm] 180
Pitch Circle Ø [mm] 216
Additional Info with bearing(s)
Multi-piece Three-piece

 

[frank]

1.3 micra is 216 pcd too, the only question is the dia of the diaphragm fingers and thrust bearing

 

[Enuo]

1.3 micra is 216 pcd too, the only question is the dia of the diaphragm fingers and thrust bearing

Be interesting to see (on the off chance it fits) any advantages to a ga14 clutch

 

[karlj]

There was talk years ago saying the ga14 clutch was being used in cg13 powered rally cars

Only real advantage would be heigher torque threshold

 

[frank]

the only benefit would be if the pressure plate had a stronger diaphragm eh, i suspect its the same personally,
more gains to be had from a chamfered 190mm GA16 friction plate imo

 

[karlj]

the only benefit would be if the pressure plate had a stronger diaphragm eh, i suspect its the same personally,
more gains to be had from a chamfered 190mm GA16 friction plate imo

Probably

Full 190 setup like baguette (iirc)

 

[Enuo]

What about a hybrid 1.4/1.6 clutch like the hybrid 1.0/1.3 clutch?

 

[frank]

What about a hybrid 1.4/1.6 clutch like the hybrid 1.0/1.3 clutch?

yeh, a chamfered 180mm friction plate fits under the 160mm pressure plate eh, so a chamfered 190 should fit under a 180mm p/p no probs

 

[r3aktor.mk]

I cant look for a 1.6 flywheel, Nissans are rare here, so i ask if only the whole kit is a straight fit?