• Please only use these forums for blogs, they are not a discussion forum

"Café Latte" K12

OP
OP
Daheem24
New(ish) rear bumper on.

Last minute before pic:

64725


During:

64726


After:

64727


The mudguards were a massive pain to tuck back in behind the bumper, and I ended up cracking some of the paint along the wheel arch :cautious:.

64731


I also got my new stalks (with front fog switches) on, but realised that I'd bought stalks off a K12 C+C, so no rear wiper switch! The front fogs are working, mind.

Old:

64728


New:

64729


I tried taking apart the old one, to see if I could maybe change over just the wiper stalk. Realised this couldn't be done, and broke it while having a try; when reconnecting back in the car, the rear screenwash sprayer is permanently on (and rear wiper permanently wiping). So I guess there's selling that set out the window :rolleyes:

64730


So I've got the correct set of stalks on order.

Also got a DAS-6 Pro for £50 off Facebook Marketplace, but it's looking like it'll be hard to get a clear/dry day to actually use it.

 
OP
OP
Daheem24
Updates...

Wing mirrors painted black:



Before:

IMG_20190907_185503_1.jpg


After:

IMG_20190907_185611.jpg


IMG_20190907_185450.jpg


IMG_20190907_185619.jpg


JDM grills painted black, and fitted:

IMG_20190907_200257.jpg


Players 13.0 in Essex:

IMG_20190915_084041.jpg


IMG_20190915_111048.jpg


Rust on the n/s rear quarter bodged:

IMG_20190921_125952.jpg


IMG_20190921_134505.jpg


IMG_20190921_163950.jpg




IMG_20190921_173548.jpg


IMG_20190922_102002.jpg


Redone professionally, bonnet holes filled, and bonnet painted black. Also pictures for standard vs my K12.

IMG_20190927_183900.jpg


IMG_20191001_170324.jpg


IMG_20191001_170333.jpg


IMG_20191001_170945.jpg


Car interior shampooed and steam cleaned, to remove the 'school minibus' smell:

IMG_20191004_074620.jpg


IMG_20191004_074558.jpg


Trax 2019 at Silverstone, on a clubstand with Nissan Ultimate Show Group:

IMG_20191006_131955.jpg


MVIMG_20191006_090039.jpg


I had lots of other little plans for this car; but to be honest, I'd rather save that money for more important things (including a car which is more fun and has more of a market for enthusiasts). So I'll just be maintaining this car for now.

 
OP
OP
Daheem24
Replaced/upgraded the front speakers as the driver's side woofer blew. Also fitted some Noico sound deadening while I had everything taken apart. There's a more resounding 'doonk' sound when I shut the door, but in my opinion there isn't a reduction in outside noise and I still get door trim vibrations when the volume is high. Was worth a try though.

Pictures/videos:
MVIMG_20200308_081414.jpg

IMG_20200308_090642.jpg

IMG_20200308_090646.jpg

IMG_20200313_161932.jpg


IMG_20200313_104434.jpg

IMG_20200313_104446.jpg

IMG_20200313_104439.jpg


I also replaced the bubbly/melted steering wheel with one in much better nick. Before I installed it, I gave it a thorough clean, colour and clear coat using a steering wheel restoration kit.

Old:
IMG_20200313_164647.jpg

IMG_20200313_164650.jpg

IMG_20200313_164653.jpg


New:
IMG_20200307_182423.jpg

IMG_20200313_123211.jpg


Also did a wash (including engine bay), tar removal, wheel polish and removed with headlight imperfections with wet & dry and DA polish:
IMG_20200328_163824.jpg

IMG_20200329_153331.jpg

IMG_20200329_155346.jpg

IMG_20200329_155354.jpg
 

Attachments

  • IMG_20200308_090642.jpg
    IMG_20200308_090642.jpg
    2.9 MB · Views: 169
  • IMG_20200313_104434.jpg
    IMG_20200313_104434.jpg
    2.9 MB · Views: 149
  • IMG_20200313_104446.jpg
    IMG_20200313_104446.jpg
    3 MB · Views: 169
  • IMG_20200313_164650.jpg
    IMG_20200313_164650.jpg
    1.4 MB · Views: 168
  • IMG_20200313_164653.jpg
    IMG_20200313_164653.jpg
    1.3 MB · Views: 177
  • IMG_20200313_164653.jpg
    IMG_20200313_164653.jpg
    1.3 MB · Views: 172
  • IMG_20200307_182423.jpg
    IMG_20200307_182423.jpg
    3.1 MB · Views: 142
  • IMG_20200313_123211.jpg
    IMG_20200313_123211.jpg
    1.7 MB · Views: 175
  • IMG_20200328_163824.jpg
    IMG_20200328_163824.jpg
    3 MB · Views: 176
  • IMG_20200329_153331.jpg
    IMG_20200329_153331.jpg
    2.7 MB · Views: 153
  • IMG_20200329_155346.jpg
    IMG_20200329_155346.jpg
    3.1 MB · Views: 145
  • IMG_20200329_155354.jpg
    IMG_20200329_155354.jpg
    3.4 MB · Views: 150
  • IMG_20200329_155354.jpg
    IMG_20200329_155354.jpg
    3.4 MB · Views: 171
  • IMG_20200405_114311.jpg
    IMG_20200405_114311.jpg
    3 MB · Views: 177
OP
OP
Daheem24
IMG_20200405_114311.jpg



Lastly, over the course of lockdown I've changed cleaned the EGR valve and changed glow plugs, all fluids and filters except for coolant, brake fluid and fuel filter.
I also replaced one of my Toyo Proxes CF2 with a Yokaham Advan V101; I wasn't really impressed with the Toyo's wear and noise, so I though it's worth trying the Advans.
IMG_20200419_155125.jpg

IMG_20200419_155203.jpg


Post-lockdown, I'll be looking to get a MK5/MK6 Golf GTI and selling this as I'm after something a bit more fun to drive. ✌
 
Last edited:
OP
OP
Daheem24
So the rust on the n/s rear arch resurfaced and I was faced with 2 options:
  1. Fork out for a welded arch & paint to halt the spread and commit to keeping the car for a while
  2. Sell the car as is (while it has some sort of value) and finally get myself a Golf GTI
In the interest of saving money for other things, I went with option 1. Ended up spending ~£1700, over 2 months, on paint/body, glow plugs, new injector and upgraded Superpro suspension bushes ?‍♂️

IMG_20200521_125812.jpg

IMG_20200521_125818.jpg

Screenshot_20200609-161041.png

IMG_20200615_163107.jpg


While it was at the body shop, I also had a few extra bits done - like spraying and fitting the OEM side skirts, sorting out a load of dents and scratches here and there, and colour coding some interior bits.

IMG_20200731_192333.jpg


The welder had a bit of a disaster with the heat melting some bits on the interior. The body shop cut the total price a bit, and I dealt with it myself to save the hassle of dropping the car off again and getting a lift back/forth. This included melted wire insulation, melted rear windscreen washer pipe, melted carpet, and melted plastic trim (all sorted now).

IMG_20200701_180034.jpg

IMG_20200701_211835.jpg

IMG_20200704_180620.jpg

IMG_20200704_180633.jpg

IMG_20200704_193922.jpg

IMG_20200704_194408.jpg


While the seats were out, I figured I'd try fitting some sound deadening in the rear. I went with (kind of) a layer of Noico 2mm thick sound deadening, and a layer of 10mm closed cell foam (CCF). Not sure if it's just a placebo effect, but I feel like it's quieter in the back. But now the majority of the sound is coming through the front half, and a lot of it is road noise (coilovers & low profile tyres).

IMG_20200710_171131.jpg

IMG_20200710_185346.jpg

IMG_20200710_195728.jpg

MVIMG_20200710_212743.jpg

IMG_20200711_171239.jpg

IMG_20200711_172002.jpg

IMG_20200711_181512.jpg


Seeing as I'm keeping the car, I figured that I should sort out some of the spots of surface rust - namely the rust between the boot lid and roof, and on the roof (due to stonechips). The former was a rough job as it can't be seen, and the latter was roughly done until I (potentially) have a full roof respray.

IMG_20200802_143239.jpg
IMG_20200801_152813.jpg

IMG_20200809_132912.jpg


On the roof, I just ground away the rust (with a dremel), rust-treated and protected with a splash of paint from a paint chip pen. Rough, but it fulfils its purpose of protecting the metal for the time being.

I also got a second key ,for a total of £91; £16 for a blank from eBay, and £75 for the programming.

IMG_20200812_202955.jpg


Finally, here are some pictures from a couple of meets during the short period between lockdowns.

IMG_20200808_180309.jpg

IMG_20200808_180323.jpg

IMG_20200808_203126.jpg

IMG_20200808_205546.jpg

IMG_20200808_205649.jpg

PXL_20200912_184746795.NIGHT.jpg


PXL_20200913_114505156.jpg

FB_IMG_1600168603623.jpg


Side note - I post more regular updates in 'K12 Owners UK' on Facebook.
 
Last edited:
How do you get the back seats out?

I read there is a clip either side on the bottom of the seat cushion but I can't see them, please any chance you can post a photo of the clips or whatever is holding the seat in?
 
Last edited:
OP
OP
Daheem24
How do you get the back seats out?

I read there is a clip either side on the bottom of the seat cushion but I can't see them, please any chance you can post a photo of the clips or whatever is holding the seat in?

I've got the sliding rear seats; so there are 2 bolts at the back (you'll need to slide the seats forward), and 2 bolts at the front. All of the bolts are covered with trim pieces which are clipped on top. The trim for the front bolts were a pain to take off, so I ended up breaking them when trying to remove them (which is why I don't have them in the pictures)

PXL_20200918_151334070.jpg

PXL_20200918_151353246.jpg
 
Top