Search results

If you have a decent bicycle pump, it might do as well.

I'm having the same problem with my K11. I've tried spraying a load of WD-40 around the lever near the gearbox, but this proved to only be a temporary fix. Would some lithium grease do a better job? Or could the clutch cable be worn, causing the squeek?

But can one still be installed even if it's not standard?

I've run in to some issues with my K11, hope you can shed a light on them. Interior light: I noticed the interior light turns on when I open the driver door like it’s supposed to, but doesn’t turn on when I open the passenger door. Is this a factory default, or did something break? Boot...

From my understanding, few pre-facelift K11's have pollen filters. If you have one, it's situated behind the glovebox behind a support bracket. What I'm wondering is; if your car didn't originally come with a pollen filter, can you still install one?

I'd be very interested in one of those as well! Sadly I don't think they'll be much good in a LHD Micra. :(

Thanks modded, I will have another look this weekend. I'd also appreciate some advice on the following: I want to install rear speakers, but for reasons beyond my male comprehension, my girlfriend doesn't want them in the parcel shelf. As she's the main driver, I'll reluctantly go along ...

My 1.0 doesn't have rear speakers either. I've been looking for the wiring for them, but so far haven't been able to find it. After removing the screws (indicated with a red arrow) and carpet, I checked the yellowish shaded area, but all I found was wiring for lights, wiper, etc. (Checked...

My 1.0 needs a new set of tyres (175/70 R13), and I'm having a hard time deciding what type to go with. I'm currently torn between Michelin's Energy E3B 1's and Conti's EcoContact 3. My main concern is with comfort (sound) and durability, as this car is mainly used as a city/commute car. I...

The difference between those two kits is in the colorscheme of the keys (black-on-black or white-on-black). I'm thinking of installing one as well, but there are some other repairs/upgrades that need to come first. If you're going ahead with it, I'd be very interested in pics/a step-by-step...

I'm experiencing the same problem. Can I just spray WD-40 around/in where the clutch arm goes onto the bell housing without causing any problems?

As long as the 'new' fusebox is from a K11 Micra, it should fit. I don't think it will be too hard to attach, but I don't have any first-hand experience, so ... I can definitely recommend getting a copy of Haynes' workshop manual. I've been finding it extremely helpful...

Went ahead and did not need any additional adapters. Nice little radio, too. :)

I want to upgrade the stock Blaupunkt radio/cassette player of my K11 to a Sony CDX-GT24 cd/mp3 player. I've read that the K11's wiring is not ISO standard and that the car audio earths through the antenna. Looking at this installation guide of the GT24, I think it comes with all the adapters...

Never mind that, just picked up a copy from eBay.

I guess that'll be my first project then. ;) First I'll have to find a copy of Haynes, which is a pain to come by here in the Netherlands. Perhaps there's a PDF version available somewhere?

After giving the resistor a thorough clean (thanks for the suggestion, frank), I think I might be able to fix her up. Will try this weekend. moddedmicra, I saw you installed Rightclick's central locking system in your K11. How much work would that be for someone who's new to this stuff?

Unfortunately, on my cart you can't see the circuits or any old solder. It's just black (or white, depending on the side). Should I just put a nice blob of solder over the corroded spot, regardless?

Thanks for your replies! andy, motor sounds fine; i'm just a little ocd about these things. :wasntme: moddedmicra, I can still cancel my order. Are there step-by-step (preferably illustrated) instructions available on how to do this? Here's a photo of the old one:

Hey everyone, this is Amsterdam calling. I just got a 1995 Micra K11 and am in the process of doing some well-needed back maintenance. On top of my list is fixing the heater/blower, which currently only works at setting "4". I've gathered from older posts that this would require replacing the...