Search results

  1. F

    K11 1L 1.4L gearbox 5th gear mod?

    I don't know if it's the case for the reatyling gearboxes, but pre-restyling cars have a machined primary (or secondary, idk) so you can't change it's gears.
  2. F

    Micra k11 Brake Upgrade Options

    IMHO anything above the OEM brakes is overkill if you don't go over 90 HP, always speaking about stopping power. However, the solid ones overheat and bend easily when the car is driven hard, so the obvious upgrade is going for a set of vented discs. Almera/Sunny/100NX 1.6's are the most common...
  3. F

    What is this connector?

    One is the front foglights, the other is probably the electric headlight height regulator. There should be two connectors with a somewhat oval shape hidden near the headlamps, sticked to the wiring loom. I managed to make it work, but only in 2 out of the 4-5 positions they should have. It looks...
  4. F

    Ford Fiesta Wheels?

    Thought there were some 4x100s. Then the difference it's way too big to use those centering bolts. Just find any other wheels, OEM ones should be cheap. Reanult and Nissan have some good looking ones.
  5. F

    Sagging driver door (worn hinge pin and bushing)

    I think he used some like those...
  6. F

    Ford Fiesta Wheels?

    Measure the center hole, it should be equal or bigger than 59.1 mm. The PCD should be 4x100, I think is the case with Ford, but better check to be sure.
  7. F

    Sagging driver door (worn hinge pin and bushing)

    Yeah, as far as I remember you have to take the wing off. I know someone who has just changed the pins and bushings from some bought in Aliexpress and it worked, but expect longer than usual shipping times if you go down that route.
  8. F

    "Thrust issues" build log

    To add something to your already fantastic summary, manufacturers usually give a range of viscosities according to the ambient temp range, but none is better than the other. I use 5W40 as I have no oil consumption at all after 30 years, but know many people that chose 10W40 and get some...
  9. F

    Det3

    AFAIK the dizzy engines dont have a CKP, only the coilpacks do. The wheel inside the distributor is the usual engine position management sensor, but most ECUs have implemented only the higher resolution one from the SR20s and not the 4? slots one in the Micra. Good luck, please post if they...
  10. F

    Looking at buying a 1.3L and throwing a 1.0L Box on it

    To expand on what he said: You need a restyling 1.0 dizzy gearbox. That means '98 to '00, I think, with the starter on the top and 18 teeth on the primary shaft. The speed sensor is electronic, so you have to swap your own in.
  11. F

    Can I fit coil 1L gearbox on my Dizzy 1.3 engine?

    I don't think so, the PnP option is the 1.0 Gearbox from the restyling cars with dizzy engines, I think that is from '98 to '00. It has to have the starter motor on the top and 18 teeth on the shaft. Also, the speed sensor is electronic and you have to use your own.
  12. F

    First car buy, Nissan micro k11

    Reliable as heck, specially if you comparte them to italian cars :ROFLMAO::ROFLMAO::ROFLMAO: You'll have to keep an eye on the rust, Pandas would have the same problem. Salty roads are also bad for the body, so try to give it a was every now and then during the winter.
  13. F

    Air induction kit.

    Well, I've tried OEM box, conical filter with pipe behind the battery and an HKS mushroom replica straight to the TB, and I must say I haven't really noticed a decrease (nor increase, obviously) in power, but it seems more lively on low rpm's. I wouldn't say it's just placebo effect, as it...
  14. F

    switch

    It's easy peasy, just a few screws on the cover behind the steering wheel, then it slides off or has a few more screws. Check that the new switch is the same as your car before buying it, because there are 2-3 types and they're not interchangeable.
  15. F

    Code

    This is the K11 sub-forum, little help you'll find here.
  16. F

    Strange accessory belt sizes

    Look it up on Nissan4U, I got my references (even though mine is a '92 Super S) there.
  17. F

    Breaking Micra K11 news!!!

    Wow, in Europe is pretty easy to get most of the stuff. The expansion bottle, yeah, from China. 15€, so worth the wait. Scrapyards still have loads of Micras, even if they scrap them fast and don't let enough time to really get them stripped. However, plenty distributors, throttle bodies and...
  18. F

    Ta teknix shocks and springs

    I don't, but know a few people who do. They take a long time to sit properly, and even then, 40 mm will feel like it's too little. They say they are comfy, a tad stiffer than OEM but not stiff enough to make the definitive track tool. Some of them cut a circle so the car sits lower.
  19. F

    Breaking Micra K11 news!!!

    And ppl on countries with not nearly as much rust problems as you guys in the UK can easily keep them rust free for over 30 years easily. Mine hits the 30 year landmark in a few months, with the only part rusted the boot due to a badly repaired hit by the previous owner, and it has sat outside...
  20. F

    Wiper jet adjustment k14 n sport

    Head the K14 subforum, I guess.
Top