Search results

With the injectors am just going to place each one in bottle with rag in it to see if squirt. If not then it will point to camshaft sensor. Have bought a second hand set of injectors to plug in and connect to fuel feed. saves having to disturb mine on block. If they squirt then its injectros if...

Cheers for that, at moment there doesn`t seem to be any fuel in the cylinders as spark plugs don`t smell of fuel or wet. Could be I have just bought a dud camshaft sensor. Buying a new one could sort it but by removing injectors and seeing if they squirt is positive way of making sure. Just got...

Tried all but bump start as your not supposed to bump start injection engines, they work in a different way to the old carb cars. AA is quite expensive to buy. Going to remove injectors as one last try and turn engine over to see if they squirt, then try a new sensor to see if one I bought is...

4 x 100 is the stud spacing, lots cars have them rim size 6.5 x 15, made in Italy, Hope that helps

From my experience it`s seems to be worth buying a dedicated reader hard wired and not bluetooth or wifi. I`ll have to stick to older cars with dizzies, rotors and HT leads or even further back, condensers and points in the future :)

Code reader is a Proscan Automotive one using car Doc App on phone. I have to say I`ve always been horses for courses in other words buy a proper reader that just does that like Autel 629 but they are expensive. When plugged my other cheaper scanner in it also came up with no fault codes after...

Can`t afford to pay anyone always been a DIY mechanic just more motorcycle than car.

Cheers for above in formation, have been through alot of above and recent scan for faults is showing now zero faults so car should start but doesn`t. turns over fires maybe once then thats it, good sparks etc. At the end of my knowledge of new cars. As I say thanls for reply and help

Cheers for advice but think it`s time to say Au revoir to the old girl hopefully someone will buy it and use or just take wheels off and spare parts

Not tried that but have squirted a bit of easy start into air box but did nothing

Just got myself another fault code reader and when scan car it says not fault codes found. I will say that have taken off negative battery terminal so this is what gets rid of codes. Now have scanned it it shows no codes but turns over fires couple times then stops Trouble I think is really my...

It flashes when igniton is off

Codes are as follows P1111 manufacturers Control P0335 Crankshaft position sensor A circuit ( just fitted new ) P1122 Manufacturer control P1121 man ufacturer control P0113 intake air temp sensor 1 circuit high p0444 evaporative emission system purge control valve circuit open P0107 Manifold...

Got rid of original black wheels as tyres worn and got these with decent tyre off e-bay. Only £100 for all four. A bargain

Hi having problems for a while now after car left standing for about month doesn`t want to start. Replaced battery, starter motor, cam and crank shaft sensors. really strange as reliable before stood still . Plenty of fuel in tank, new spark plugs. Fuel is pumping to front of car. Strange that...

Diagnostic reader i have came up with these codes. When scrolled down to read codes it worked but then when did it again it came up with `No codes stored on module`. Tried to delete codes but it said ignition had to be on to do this and it was on. Dobn`t know how I got to show codes though...

Well got tester (£10 one) and tried on car. It comes up that there are 8 codes but when try to see them in says `None stored on module` Bit strange as to why it says there are 8 codes but won`t let me read them. Also when try to look at freeze frame data it says turn ignition on without engine...

Hi K12 Boffins Whilst trying to get engine sorted found this dark green wire running astray . It seems to have been attached to a switch which was pushed down when bonnet closed. They wire with a connector at each end was just wrapped around wiring loom. Anyone have an idea what it did or should...

Will give the VALUE FOR MONEY one a try . As long as it give sthe P codes i can look it up on internet.Should be here next week so will let you all know, pick your brains a bit, when it arrives. Very much looking forward to giving it a try

Going to give it a go then is cheaper than the Autel (£85-£99) So got to be worth a try. Also thanks for informatio on P codes, handy to know. Cheers John