Search results

  1. Sina

    Identifying bumper and headlights

    Does anyone know where I could get this bumper? Also how can I achieve the same headlight look?
  2. Sina

    Fitting VGT turbo

    I agree that the vanes and w/g work in different ways but if you have a look at this diagram My turbo operates the other way around, so as the vacuum increases, the vanes become less restrictive. Hope this explains it.
  3. Sina

    Fitting VGT turbo

    Hi Frank, The VGT should be controlled via the vacuum in the wastegate. I'll initially use the vacuum from the vacuum pump and test. If that doesn't work well, I'll use a solenoid controlled by a potentiometer attached to the gas pedal.
  4. Sina

    Fitting VGT turbo

    There are two 10mm positioned vertically behind the pipe (just before the bend) that hold a bracket in place. Once those are removed, pull the pipe to the left so that both ends are free and then just wriggle it out. The turbo will obviously increase the HP and torque as it is larger than the...
  5. Sina

    Fitting VGT turbo

    I'm installing the VGT (variable turbine geometry) turbo from a 110hp k9k to the 80hp k9k. I'll probably have to make custom adaptors for the exhaust manifold. https://imgur.com/gallery/4PsaO I have completely removed the turbo and exhaust manifold. I've made templates of the screw pattern and...
  6. Sina

    volume control with aftermarket stereo

    Hi, This is my first thread on here, has anyone managed to get the volume control on the steering wheel to work on an aftermarket stereo? I have a 2004 k12 1.5 dci se. My stock stereo looked like this The controls on my steering wheel look like this The stereo i have installed is a pioneer...
Top