Search results

  1. M

    Scan tool. Load_pct % question

    Nissan micra 1.0 2001 When the scan tool is connected it shows live data as .... Load_pct % 0.8 While driving under different conditions it still gives the figure as 0.8 Surely this isn't correct. Error code p0171 system too lean . Any ideas?
  2. M

    P0171

    Why would the reading for Load_pct be always reading 0.8 ? Should it not fluctuate as the revs change?
  3. M

    P0171

    I unplugged the maf and it ran worse. Here's a datastream with the maf plugged back in and the codes cleared The engine was fully warmed up and was in Closed Loop but if I blip the accelerator it would go into OL-DRIVE FUELSYS1 OL-DRIVE ETC °C 80 SHRTFT1 -7.8 LONGFT1 0.0 RPM...
  4. M

    P0171

    Ok I must try full throttle up a hill and see how I get on :)
  5. M

    P0171

    Cheers
  6. M

    P0171

    I'm wondering if the pump is supplying the recommended pressure though. I thought I should be able to hear it, if the pump is weak it could cause a system lean code?
  7. M

    P0171

    I think its gas (petrol) in the manifold. I cannot hear the pump priming when I turn the key on. Is this normal, or should I hear the pump?
  8. M

    P0171

    Hi, a friends 2001 micra k11 with 106,000 miles has an engine light on with the code P0171 system too lean. After clearing the code and driving, the longterm fuel trim increases to 25 and stays at 25. There is a small pool of fluid in the inlet manifold. Any hints of tips as to what the...
  9. M

    Newbie from Ireland

    Hi all, Great bit of info on this site here. Have used it for valuable tips etc before, I have a UK import 1.0 litre Micra 'Shape'!! Its a great little motor with 105,000 miles on it. By the way, can someone move my other post to the correct section.... It should be in the K11...
  10. M

    Heater Motor not working

    No, it doesn't work on any speed at all. But, once for a moment or so, it did work, but then stopped again.
  11. M

    Heater Motor not working

    Hi, My K11 Heater has stopped working. The fuse is ok... actually once it even came back to life briefly. It doesn't work on any setting now, and before it stopped there was a noise coming from the motor itself (i think). Any suggestions, Thanks madpanfan EDIT: i think i posted this...
  12. M

    Alternator light on sometimes

    I had a better look and it was very black looking on the outside. Needed a quick fix so I just stuck a reconditioned unit in instead. Seems better so far..... Now I can play with the old one :laugh: Cheers, madpanfan
  13. M

    Alternator light on sometimes

    Hi, newbie here. My sisters 94 Colt (4g13 I think) has the alternator light on now and again. It only happened today. Giving it a rev doesn't always help. The belt is good and tight, with no noise. New-ish battery, with clean and tight connections. Eventually while driving, the light...
  14. M

    PC help needed. windows XP not responding

    Thanks lads. Problem solved eventually...... cheers madpanfan
  15. M

    PC help needed. windows XP not responding

    Hi, My wife just rang to say that she opened a message in Outlook Express, and now her Windows XP is hanging! The message was from an unknown sender called ' Sheldon Sorensen ' and the subject line was ' forward:info ' . I googled those terms from my pc in work here, but didn't get any...
  16. M

    Micra Not starting K11

    Thanks for the replies guys. This post seems to give an explanation as to what was wrong as regards to the not starting problem http://www.micra.org.uk/showpost.php?p=89729&postcount=1 But I still don't know what the flashing light was all about. The car is starting/running fine since, with...
  17. M

    Micra Not starting K11

    Hi , Im new here. The other day my wife rang to say her K11 had the 'engine CHECK' light flashing on the dash. She drove home with it flashing and said the car was sounding/running ok. When I got home, I tried to start it, it did fire, very quickly, but then only ran for five seconds, cut...
Top